Outer Limits 4x4 Board

hey peoplez... i wanted to no how much you should pay for coil spacers.....??? 30mm all round...??????


thanks

I payed about $50 for 4 a coupla years ago from Procomp

yep thanks!!!!! ill give them a call tomorrow!!!!


thanks

prices have gone through the roof. even ebay is around $200
hopefully procomp are still good pices

procomp do a 15mm spacer for $$25 each

What a rip off!! Some guy was asking where to get ploypropelene to make his own or have them made the other day. Do a search and you may find out something. It was either in this section GEN4X4 or NISSAN. Don't they do 30mm for a zook?? or don't they do 30mm at all anymore??

I agree. I bought some about 3 years ago and paid about $50 for 4. $25 each is just a plain RIP OFF!!!!

Jeff80 wrote:I agree. I bought some about 3 years ago and paid about $50 for 4.

lots of things were cheaper 3 yrs ago..

I payed about $50 for 4 a coupla years ago from Procomp

prices have gone through the roof. even ebay is around $200
hopefully procomp are still good pices

bogged wrote:

Jeff80 wrote:I agree. I bought some about 3 years ago and paid about $50 for 4.

lots of things were cheaper 3 yrs ago..

Now c'mon Bruce, even YOU would have to agree that $12.50ea to $50ea in less than 2yrs is just a bit out of step with inflation.

mayte buy a block of poly , and attack it with a jigger saw

some people like being bent over repeatadly, so paying over eggsagurated prices is fun for these types.

Me however, i'm still a virgin, and i wanto keep it that way.

do clark rubber have this stuff? maybe i should drop in on d way home.

Jes

Even though in essence it is just a hunk of poly. It does have to be moulded to fit the end of the coil spring or else it will probably end up pushing your spring out under flex

Yes BOGGED, things were alot cheaper 3 years ago. But IMO, a 200% mark up is just a bit rich, especially when CPI is about 5%!