Outer Limits 4x4 Board

hi guys i tryed tryed the serch butoon but it didnt work iam thinking of making a snorkel for my 1lt sierra and whould love some pointers and pics

i just done a search and found tons of infoo. just wade through the results :|

here is a link i had saved a while back.. http://www.nitromax.nl/SAMSNORKEL.htm
hope that helps.. there are also links on PVC snorkels... if ican find em ill link you up

Bible has a link also.
Ado

you put snorkel in the search area plus search in Suzuki section and 6 pages come back with results. Many have snorkel in the title, how could you not get it to work?

50mm waterpipe.

Mine. 3" exhaust pipe and angles cut from mandrel donut with donaldson air ram on top.

Mines pretty much the same as ausyota's but mine go's in front of the sierra badge and some pipe inside takes it into the air intake!

suzuki can you get some pics for me? sounds like the way i want to do mine as well. i prefer to have is shorter and not running all the way up the guard..
i am thinking i need to set mine up on passenger side as the supercharger will be mounted that side

I bent a coat hanger to the shape i wanted and just took it into the local exhuast joint and got them to bend up a piece of 2 and a half inch marine grade stainless pipe .

smiley_smoke wrote:suzuki can you get some pics for me? sounds like the way i want to do mine as well. i prefer to have is shorter and not running all the way up the guard..
i am thinking i need to set mine up on passenger side as the supercharger will be mounted that side

I gueese you mean me?

I'll try to get some loaded up today! You don't have to do it through photo bucket and stuff do you?

I'll try my best!

hi mate yeh sorry forgot to type your whole name
or if you want to email me them i can upload them to my site and put em in the post?
samianderson@westnet.com.au

Cause i have got a 1.6 mpfi now, airbox is on pass side.

I am looking at buying some of the 3" rubber bends and then using straight mild or stainless between them.

Either this or get a 3" exhaust tube bent one.


Nic

Heres some pics guys!

Thanks heaps to smiley_smoke for helping me get the pics in working order !

Mines pretty simple is held to the body usung the areil brackets. Then the pipe just go's down over the guard in to the air box.

I took of that thing for the throtal or what ever and it IS shut of with the cap from a milk bottel and siliconed in!


The guy that gave it to me did it a long time ago and is apparently exaust pipe covered with fibre glass. I don't know how he made the top bit though!

ENJOY AND GET SOME IDEAS!

http://members.westnet.com.au/samiander ... iboy/1.jpg
http://members.westnet.com.au/samiander ... iboy/2.jpg
http://members.westnet.com.au/samiander ... iboy/3.jpg
http://members.westnet.com.au/samiander ... iboy/4.jpg
http://members.westnet.com.au/samiander ... iboy/5.jpg

ZookStock

to add to this thread and avoid a useless one.... I just bought 1.5m of 3 inch mild steel and a 180 degree (half dougnut).
I like the idea of going from near the back of the fender as i will do a virtual lift in the future...
Want some advice on going through the guard with three inch and attaching it to the flexy pipe with Is 2.5????

how much did this cost you?

also where do you get the dohnuts from?

Has anyone got any pics of the connection to the vitara airbox? As i have the mpfi engine and installing a vit airbox in the sierra

Nic