Page 1 of 1
Need some simply alloy welded in Melbourne
Posted: Fri Oct 31, 2003 3:48 pm
by ToNkA
Almost finished with the mods to the highmount.
I need to get some alloy tabs welded to the winch to run the two cross braces I have that go over the back of the drum like on the M9000 and M10,000 winches. I am sure those that have done this mod know what I am talking about.
Where in Melb can someone do this simple little alloy weld for me?
Cheers
Posted: Fri Oct 31, 2003 4:12 pm
by N*A*M
awill4x4 ??
Posted: Fri Oct 31, 2003 4:14 pm
by getdirty
Sandy at Aus4WD can do that for you..... 9729 4899 or
info@aus4wd.com.au ...dont bother calling till next wednesday though, he's up at Nissan Trials.
Posted: Fri Oct 31, 2003 8:32 pm
by bogged
N*A*M wrote:awill4x4 ??
Andrew at D&F Racing
Fcty 13/ 27 Aster Ave
Carrum Downs
9775 0558
Next door to the brothel.
Posted: Fri Oct 31, 2003 10:39 pm
by awill4x4
Yeah, it looks like I've been dobbed in.
I can weld them if you need me to Tonka. As Bruce posted, give me a ring at work on (03) 97750558.
Regards Andrew.
ps: We provide a (very discreet) parking service for visitors to next door
Posted: Sat Nov 01, 2003 8:17 am
by moose
We also do ally welding at work !!!!
Posted: Sat Nov 01, 2003 9:47 pm
by awill4x4
Posted: Sat Nov 01, 2003 10:50 pm
by ToNkA
Thanks guys!
Posted: Thu Oct 19, 2006 2:05 pm
by V8 Middy
Tried AUS4wd but the recorded message doesn't sound much like abusiness.
Anyone have any more recent info on getting aluminium welded?
Thanks
Posted: Thu Oct 19, 2006 2:06 pm
by N*A*M
Andrew at D&F Racing does awesome work. Only bad thing is how far they are from me.
Posted: Thu Oct 19, 2006 9:41 pm
by bogged
N*A*M wrote:Andrew at D&F Racing does awesome work..
x 2... so good hes so close :d
also very handy to
New Palace.
31 Aster Avenue.
CARRUM DOWNS 3201
Posted: Fri Oct 20, 2006 8:10 am
by landy_man
mmm.. he is only round the corner from me at work as well...
