Outer Limits 4x4 Board

moved my front diff forward 40 mm on the weekend now need to get the front tail shaft extended,with the lift and extra travel i need it to be 100mm longer,i rang drive line services today and they said because of its age it will more than likely need new slip joints,400 was the price this seems ridiculously deer can any one recomend some were or ill even extend it myself if i can get some one to balance it,thanks.

Have you considered box section front tail shafts? woulndt think they would ballance but then you only uses them in 4wd.

Ring Petron Automotive (southside) as I'm pretty sure they will be able to help.

have been warned against box section by a fair few people,but ill give that mob a ring tomorrow thanks guys.

I just had my rear lengthend - 170$ but the slip was good.

Are you free wheeling? is so who cares about the slip.

bastard wrote:have been warned against box section by a fair few people...

for what reason(s)?

bastard wrote:have been warned against box section by a fair few people,but ill give that mob a ring tomorrow thanks guys.

Let me guess, vibration?

Otr you can machine up an ally spacer.
$400 also seems fair to me.

Bazzle

Gribble wrote:

bastard wrote:have been warned against box section by a fair few people,but ill give that mob a ring tomorrow thanks guys.

Let me guess, vibration?

Aparrently they cant get a true balance and ive been told this flogs out pinion seal etc,also id like the week link to be the tailshaft,easy to replace than a crown wheel.

so how'd ya go?

170 dollars drop it off tomorrow they are nice and close to just beside springwood marine.Thanks