Page 1 of 1
Spring Guiding Cones
Posted: Sun Nov 19, 2006 7:02 am
by SoldierBoy1
Can someone tell me where I can get a set of Cones for a Disco, as I now require them to stop my springs from coming out of their set at full stretch.
Bruce?
Posted: Sun Nov 19, 2006 7:52 am
by Carl Coight
I used some scrap pipe (115 od i think) and it works fine.
Carl.
Posted: Sun Nov 19, 2006 12:54 pm
by SoldierBoy1
Thanks carl i will give it a try.
Bruce
Posted: Sun Nov 19, 2006 9:56 pm
by landy_man
retaining the springs will work better offroad..
this has been discussed many times before
Posted: Mon Nov 20, 2006 5:58 pm
by subaman
I have retained the springs in the rear of my classic rangie at the top and made the cones up for the bottom as i had them retained top and bottom but kept breaking the retainers.
Posted: Mon Nov 20, 2006 6:00 pm
by landy_man
make the retainers stronger then...
I have 12mm steel retainer strips top and bottom.. and they have been fine... no bending them
Posted: Mon Nov 20, 2006 6:06 pm
by Aquarangie
....Or you can use hose clamps. I used some big arse ones and so far they haven't broken. I also haven't got massive long travel shocks either
Trav
Posted: Thu Nov 23, 2006 7:12 am
by james feeney