Page 1 of 1
Patrol factory diff ratios
Posted: Mon Nov 20, 2006 5:22 pm
by lwbmav
Hi guys can someone tell me the gu diff ratios and will a rear GU diff fit a GQ?
Re: Patrol factory diff ratios
Posted: Mon Nov 20, 2006 9:48 pm
by bogged
lwbmav wrote:Hi guys can someone tell me the gu diff ratios and will a rear GU diff fit a GQ?
which GU?
which GQ?
GU diff will fit, but will it be a match to the GQ front
Re: Patrol factory diff ratios
Posted: Tue Nov 21, 2006 8:18 am
by weeman
lwbmav wrote:Hi guys can someone tell me the gu diff ratios and will a rear GU diff fit a GQ?
GU diff ratios
as follows
3.9
4.1
4.3
4.6
The above are all genuine can get aftermarket 4.88...
And provided the GU diff (entire centre ) is a small diff hs233 yes that will bolt into the rear the of the GQ not a problem. However the front CW & P need to be rebuilt for the GQ front ends, CW & P are the same in both types of vehicles its just the diff centre housing is different between GQ and GU.
Also to note that some GU's came with a rear large diff and i believe the only ratio they were in were 4.1 and 4.3 and they were found in the petrol & diesel (3L only) manuals but nissan did mix and match a little bit.
Re: Patrol factory diff ratios
Posted: Tue Nov 21, 2006 1:54 pm
by lwbmav
weeman wrote:lwbmav wrote:Hi guys can someone tell me the gu diff ratios and will a rear GU diff fit a GQ?
GU diff ratios
as follows
3.9
4.1
4.3
4.6
The above are all genuine can get aftermarket 4.88...
And provided the GU diff (entire centre ) is a small diff hs233 yes that will bolt into the rear the of the GQ not a problem. However the front CW & P need to be rebuilt for the GQ front ends, CW & P are the same in both types of vehicles its just the diff centre housing is different between GQ and GU.
Also to note that some GU's came with a rear large diff and i believe the only ratio they were in were 4.1 and 4.3 and they were found in the petrol & diesel (3L only) manuals but nissan did mix and match a little bit.
Thanks mate that's what I needed to know .
Is there a 4.625 and a 4.636 factory ratio?
I bought a aftermarket 4.625 front but the bloke at the wreckers is telling me the factory rear he has is a 4.636?????????????????????
thanks Scott
Posted: Tue Nov 21, 2006 8:12 pm
by raptorthumper
Heres Grungles homepage with the specs on gearbox and diff ratio's from factory for GU series.
http://www.mcs.net.au/~grungle/specifications.html
________________________________________
Posted: Wed Nov 22, 2006 5:24 pm
by lwbmav
Thank's old mate
I went to the wreckers today to have a look it does'nt even look like a Patrol diff and the car he thought it was out of was the 3lt with the 4.3's pitty it was a good price.
Posted: Wed Nov 22, 2006 8:12 pm
by patrol man
I fitted 3.5's to my GQ, they were out of a GU 4.8 auto,
As for the 4.6 ratio differences ,count the teeth,
Cheers Phill.