Snake dropped pitman arm
Posted: Wed Nov 22, 2006 6:51 pm
Am just about finished the 5 link sas finally. Using a 75 series pitman arm while leaving the IFS box in it's original factory position means the drag link thread fouls on the chassis when turning by about 10mm overlap.
Now instead of going to all the work of relocating the IFS box from it's factory position, I came accross this:
Snake Racing Dropped Pitman Arm
http://72.34.32.141/~snakerac/product_i ... ad0deb1021
Seems like an quick and easy solution if you ask me. Though there's no side on pic to show how far it drops or how far it still extends etc. Any one have any comments on the idea and know of anyone running these? Or if they fit the IFS spline and the standard Hilux drag link joint taper? There's no worries about leaf springs being in the way or anything
Now instead of going to all the work of relocating the IFS box from it's factory position, I came accross this:
Snake Racing Dropped Pitman Arm
http://72.34.32.141/~snakerac/product_i ... ad0deb1021
Seems like an quick and easy solution if you ask me. Though there's no side on pic to show how far it drops or how far it still extends etc. Any one have any comments on the idea and know of anyone running these? Or if they fit the IFS spline and the standard Hilux drag link joint taper? There's no worries about leaf springs being in the way or anything