Page 1 of 1
60 series quarter window
Posted: Thu Nov 23, 2006 7:27 pm
by Sam Walker
HI all, got a good cond drivers door from the wreckers to replace one with big rust holes...but the replacement has all the parts stripped off it and appears not to have had a 1/4 window. Will I be able to swap the window etc from my FJ62( does have 1/4 window) into it ?
cheers
Sam
Posted: Thu Nov 23, 2006 8:08 pm
by Homer
Yes
The 1/4 glass frame and front slide for the glass are all the one frame it is held in by a bolt near the winder handle and three screws under the rubber seal on the front of the door
I know because I just changed my frame because the bottom of it rusted out
Cheers
Scott
Posted: Fri Nov 24, 2006 8:23 am
by Sam Walker
Thanks Scott, The door and I are in a different place than the car so that's good to know - I'm just off to send the door home on the barge...