Roll cage in an 80

Post by **DX80** » Mon Nov 03, 2003 7:01 pm

Curious to know if anyone has made a half cage for an 80? I'm going to make one to go just behind the front seat belts, bolted through the floor and strengthenned onto the chassis. Be interested to see any pics or thoughts on what's been done before.

Post by **80diesel4play** » Thu Nov 06, 2003 7:42 am

CHeck out this years OBC dvd - there's a couple of 80's running them...

Personally - Thats low on my lost for shopping - only becausee I know that I will drive that extra 10% with it in....

Could have used it Sunday against that damn Suzi....!!!

Post by **Kev80** » Thu Nov 06, 2003 9:24 pm

Let us know how you go as i have also thought about doing this, haven't done anything about it yet though. :roll:

http://www.outerlimits4x4.com/PHP_Modul ... +roll+cage

Post by **DX80** » Fri Nov 07, 2003 4:56 am

I thought it was low on the priority list as well until I watched Shane Barlows very slow roll over on the weekend, and how much damage it caused. Will post pics once it's done. It will be a removable one, so I can still use my rig day to day without bars being in the way.

Post by **dow50r** » Fri Nov 07, 2003 7:30 am

Gday guys
A fellow on the north side of Sydney has a 1/2 cage in his 80, and some photos of it on the net, will advise
Andrew

Post by **dow50r** » Sun Nov 09, 2003 5:13 am

Check this out
http://community.webshots.com/album/89108921ECCAey
Andrew

Post by **DX80** » Sun Nov 09, 2003 8:57 am

Yeh, had a good look, and planning for mine to turn out something like that.

Post by **Kev80** » Sun Nov 09, 2003 11:31 am

Thats one full on roll cage, whats he doing.....rally driving

Post by **dow50r** » Sun Nov 09, 2003 7:10 pm

He likes competitions, has a 454 injected in it now. :idea:

Andrew

Outer Limits 4x4 Board

Roll cage in an 80

Roll cage in an 80

Who is online