Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearing for 35's

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 54
Joined: Sun Nov 26, 2006 11:37 am
Location: Stockton NSW

Gearing for 35's

Post by paulio1 »

Just fitted up some 35's to my 80's range rover and high range is now very sluggish.
Low range still seems not too bad.

Can anyone recommend a fix for me please :)

I have been recommended possibly gears from a defender transfer case?
Posts: 500
Joined: Tue Nov 04, 2003 2:00 am
Location: Canada

Post by red90 »

Shift to a lower gear.
[color=red]1991 Landrover 90 ex-MOD[/color]
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

4.11 diff gears
Damien


--------------------------------------------------------
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Hey mate, got your PM, will let you know in a few days about what your chasing, what year rangie or more particular what trans. has it got, cause if your still happy with low a transfer swap might be ok
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

more power and torque would fix it. 4.1 diffs would too. so would sifferent transfer gears (defender transfer if you are running a lt230).


Andy
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

best fix.

4.1 or 4.3 diffs.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 111
Joined: Wed Jun 15, 2005 10:44 am
Location: yinnar south

Post by mopar rangie »

change transfer gears.quickest fix to help it get moving.
smooth rides with power
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

Gearing for 35's

Post by swamp »

Go with the transfer gears
the gear sets dont wear much so second hand ones are worthwhile
It's cheaper than two 4.11 diff gear sets that usually have to be new
3.54 diff gears are maginally stronger than 4.11 and available easier
Do the transfer gears first , if your still not satisfied try more power it brings more smiles to the dial than gearing will for the money spent
Cheers
out of my mind, back soon.
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

tran gears dont fix crawl ratio.

only halfa fix.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

4.11's will bring gearing back to normal
TD5 96 Discovery UTE.
Posts: 54
Joined: Sun Nov 26, 2006 11:37 am
Location: Stockton NSW

Post by paulio1 »

Ok so 4.11's sound like the way to go, what is required to change my diffs to this ratio? And could someone recommend where to get the parts to do this please :D thanks everyone for the replies
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

Well 2 choices, Rover 4.11 cw&p. Still stuck with a relatively weak set of gears. But if you have Maxi lockers and axles this would be the way to go.
Or
Toy conversion with 4.1 cw&p and Jacmac axles, a stronger set up im my opinion
just my 2c
Damien


--------------------------------------------------------
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

Gearing for 35's

Post by swamp »

I agree transfer is not the ideal fix but for a set of second hand gears, half a days work,a few litres of oil , $2-3 hundred you should be on your way.
4.11's front and rear minimum 2k.properly installed.
If you now have open rover diffs, then most would steer towards the toy set up. I'm not sure of their costs.
Maxidrive new with new 4.11 installed approx 3k an end.
Food for thought.
Michael.
out of my mind, back soon.
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

The defender gear set are a cheap option for road use, but like Micheal said, it's only a half-arse solutuion.

The Maxi-Drive 30% reduction low range is the best solutuion. It's about the same price as 4.11 CW&P set and only works in low which is where you want your ratio altered IMO.

With that set-up above, the total cost would cost you $2K if DIY, maybe a bit more if you have it fitted profesionally

The 4.11 CW&P set would give you roughly about 12% reduction overall in low and high from what I have been told.

Trav
Land Rover- The Collingwood of 4WD's!!!!
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Re: Gearing for 35's

Post by cloughy »

Aquarangie wrote:
The Maxi-Drive 30% reduction low range is the best solutuion. It's about the same price as 4.11 CW&P set and only works in low which is where you want your ratio altered IMO.



Trav
paulio1 wrote:Just fitted up some 35's to my 80's range rover and high range is now very sluggish.
Low range still seems not too bad.
:roll:

Defender transfer cases are dear as poison but a good fix IF your still happy with low range
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

It high range that his not happy with you guys are missing the point...

4.11 ashcroft gears http://www.ashcroft-transmissions.co.uk/about.html good luck with the postage ;) ;)

or do a toy conversion... if you dont want lokkas then do a toy conversion as the diff as a whole is stronger... if u all ready have lokkas then get the ashcroft R&P

HTH

Mick
TD5 96 Discovery UTE.
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

R & P

LRA $660.00 an end.

http://www.lrautomotive.com.au/20.html

change the diff ratios.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

HSV Rangie wrote:R & P

LRA $660.00 an end.

http://www.lrautomotive.com.au/20.html

change the diff ratios.

Michael.
I dont think he can get the good ones anymore.. try jacmac as i was there a last week and showed him the ashcroft website as he was going to order some 4.11's for a client....

Mick
TD5 96 Discovery UTE.
Posts: 54
Joined: Sun Nov 26, 2006 11:37 am
Location: Stockton NSW

Post by paulio1 »

Awesome replys... thanks heaps :)

I am after some more in high range as I do a bit of beach work and
need the high range to really sing.

Havent given the low range a good work out since the 35's so i may still
be unhappy with that too on the hills... but in the mud and light hills its fine.

I think i will go with the 4.11 CW&P. Now just gotta find the parts.
PS probably going lockers soon too... or rear locked diff and front locker..
if that changes anything in terms of options for this gearing issue.
Last edited by paulio1 on Thu Nov 30, 2006 10:19 pm, edited 2 times in total.
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

paulio1 wrote:Awesome replys... thanks heaps :)

I am after some more in high range as I do a bit of beach work and
need the high range to really sing.

Havent given the low range a good work out since the 35's so i may still
be unhappy with that too on the hills... but in the mud and light hills its fine.
If you do a lot of sand work i would go the toyo conversion and get some 4.3 hilux/bundy diffs
TD5 96 Discovery UTE.
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Post by Maggot4x4 »

4.1's are perfect on the beach with 35's

If you can weld, think about going gq front diff and 80 series rear, they come with 4.1's as standard and much stronger
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

He is running a LT95, when he is talking about transfercase gearing he is talking about a stage 1 LT95 we know of nice and cheap, his gearbox is in need of a rebuild. I have been told the stage 1 LT95 has lower gearing to the rangie one? if this is the case it would be a good cheap option and kill 2 birds with one stone, it wasnt to bad till he went from 33s to 35s and there still some problems with the motor to sort out which will get him some more low down yet.

How would the stage 1 LT95 go?
Posts: 166
Joined: Tue Sep 28, 2004 8:12 pm

Post by disco95 »

From what I've read on this site (and others) It appears to me that the Defender high range set and the maxi 30% reduction set would be the way to go. Add to that maxi axles and lockers, or jacmacs, and you'r well on the way to being pretty unstoppable.
Now, why would you be going for toyota changovers etc.? Is it cheaper and easier? I can't see it as being easier.......I maen pulling out a TC is really not that hard, and if you're prepared you can do it in and out in a couple of day no probs.
Posts: 22
Joined: Fri Nov 10, 2006 9:48 pm
Location: Portugal

Post by nunoeumiranda »

I'm Using 4,75 R&P from KAM and rolling with maxxis 35"*13.5*16 and i'm very happy with it.. stock lt230 and Zf auto... man for crawling its amazing...until know nothing to appoint..

I'm thinking do a toy conversion and maybe i go to the yukon 4,88 R&P or maybe 5.22 to the 37" tyres..

Cheers
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Post by DiscoDino »

Not sure about pricing in AUST, but I am assuming that you can easily get your hands on two Toy 3rd members with the gearing you want, better axles and install them for less than 1200 AUST $, no? If not less, then a wee bit more, but you gain LOADS...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest