Page 1 of 1
79 Series Ute - is the front end the same as a 80 or 100
Posted: Mon Nov 27, 2006 6:22 pm
by Red Rover
Is the front end diff housing different in it's own right, or is it the same as a 100 or 80
thanks in advance
Posted: Mon Nov 27, 2006 6:26 pm
by dow50r
Pretty sure they r different...the coil springs for instance are different size, id say overall length is also different. as would be swaybars etc.
Centre would be 4.3, cv's would be ???
Posted: Mon Nov 27, 2006 7:59 pm
by 80UTE
dow50r wrote:Pretty sure they r different...the coil springs for instance are different size, id say overall length is also different. as would be swaybars etc.
Centre would be 4.3, cv's would be ???
To add to what dow50r wrote,
Axle is 80mm narrower than 80/100 axle.
Shortside has the same C/V-inner axle as 80/100 DX
Axle is shorter on Long side by ~80 mm
Brakes hubs disc's etc the same as 100's
Diff centres are the same 4.3.1 on 1HZ and 4.1 on 1HDFTE engines
Wally