Page 1 of 1

One Peice Tail Shaft???

Posted: Mon Nov 27, 2006 6:53 pm
by LuxyBoy
Ok i have searched and checked the bible to no avail :cry:

I am wanting to know which model Hilux/Surf/4Runner shaft will replace a 91' LN106 :?:

Posted: Mon Nov 27, 2006 7:10 pm
by Roctoy
i just went to the wreckers and got an LN130 surf shaft but it fitted perfect because i had dual cases. Measure what you need and take the tape measure to the wrackers with you and hope for the best.

Posted: Mon Nov 27, 2006 11:03 pm
by toyrex
None you will have to get one made unless you have dual transfer cases then as above

Posted: Tue Nov 28, 2006 1:54 pm
by LuxyBoy
toyrex wrote:None you will have to get one made unless you have dual transfer cases then as above
Well i know someone that has it but can't remember what his was off so you are wrong there.

Posted: Tue Nov 28, 2006 4:37 pm
by Tomolux
i picked up one from a gen 1. 2" longer than two piece shaft, so it fits mine with ifs rears perfectly

Posted: Tue Nov 28, 2006 5:29 pm
by batcho101
have one fore sale at the moment pm me about it

Posted: Tue Nov 28, 2006 9:29 pm
by toyrex
The early gen 1 universal has less articulated flex than the universals in the later tailshafts

Posted: Tue Nov 28, 2006 10:21 pm
by bubs
the 4 gen hilux dual cab's some had single piece rear drive shafts

Posted: Wed Nov 29, 2006 7:43 pm
by Tomolux
and the gen 1 flanges are different, smaller, smaller bolts too