Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Side exhaust outlet?
Side exhaust outlet?
is this legal in VIC?
Would sort my exhaust issue with trying to get it to the back on the LWB.
I would probably route between body and chassis though but still have it exiting in front of the rear wheel
similar to this one
Would sort my exhaust issue with trying to get it to the back on the LWB.
I would probably route between body and chassis though but still have it exiting in front of the rear wheel
similar to this one
According to the "Guide to modifications for Motor Vehicles" VSI 8, May 2003 from VicRoads:
The outlet must extend at least 40mm beyond the furthermost outboard or rearmost joint of the floorplan which is not continuously welded or permanently sealed. The outlet must not protrude beyond the perimeter of the vehicle when viewed in plan.
If to the side of the vehicle, the outlet must discharge downwards at an angle to the horizontal of not less than 15 degrees nor more than 45 degrees and to the rear of any adjustable window or vent. if the vehicle is manufactured after June 1988, the discharge must be to the right hand side of the vehicle.
The outlet must extend at least 40mm beyond the furthermost outboard or rearmost joint of the floorplan which is not continuously welded or permanently sealed. The outlet must not protrude beyond the perimeter of the vehicle when viewed in plan.
If to the side of the vehicle, the outlet must discharge downwards at an angle to the horizontal of not less than 15 degrees nor more than 45 degrees and to the rear of any adjustable window or vent. if the vehicle is manufactured after June 1988, the discharge must be to the right hand side of the vehicle.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
dkdk
I have it setup on my swb with 31 simexes and are yet to encounter a problem with fumes or offroad damage.
you know you want one
Re: dkdk
they aren't the problem, legality is the issue and it isn't legal in that setuppatzuki wrote:I have it setup on my swb with 31 simexes and are yet to encounter a problem with fumes or offroad damage.
Ransom note = demand + collage
Hey thats my Rig!! lol
According to my mechanic it is legal IF
A: Its rearward of the most opening window.. in this case its the passengers.. NOT the REAR..
B: SHOULD be cut at a 45deg. angle towards the REAR wheel, as not to pump fumes into the vehicles/pedistrians beside you..
Just what i was told, might be wrong, might be right.. dont plan on changing it till i get questioned on it or squash it... lol
According to my mechanic it is legal IF
A: Its rearward of the most opening window.. in this case its the passengers.. NOT the REAR..
B: SHOULD be cut at a 45deg. angle towards the REAR wheel, as not to pump fumes into the vehicles/pedistrians beside you..
Just what i was told, might be wrong, might be right.. dont plan on changing it till i get questioned on it or squash it... lol
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]
A few episodes before they can it? :lol:[/quote]
A few episodes before they can it? :lol:[/quote]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
foolsp33d wrote:Hey thats my Rig!! lol
According to my mechanic it is legal IF
A: Its rearward of the most opening window.. in this case its the passengers.. NOT the REAR..
B: SHOULD be cut at a 45deg. angle towards the REAR wheel, as not to pump fumes into the vehicles/pedistrians beside you..
Just what i was told, might be wrong, might be right.. dont plan on changing it till i get questioned on it or squash it... lol
As far as i know (mechanic by trade) that should be exiting behind the last window or opening. Last time i looked at my soft top zook that was the rear of the vehicle, as the sort top is not air tight, therefore will allow fumes to access the cabin. Have ased this question to a ex RTA inspector that i worked with and his response was FAILURE.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
ahhh well... cant win em all...
you see ALOT of 40's both hard and soft tops with side exiting exhausts..... the same with things like mustangs and Cobras with lake pipes i guess...
you see ALOT of 40's both hard and soft tops with side exiting exhausts..... the same with things like mustangs and Cobras with lake pipes i guess...
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]
A few episodes before they can it? :lol:[/quote]
A few episodes before they can it? :lol:[/quote]
I'm not sure about the laws in Aussie land but here in the US they don't care about that stuff. I had dual side exit exhaust on my samurai. what I did was add a Y adaptor right after the Cat and then mounted short 12" cherry bomb mufflers at each end of the Y and ran piping out to each side right before the rear wheel well. If I were to do it again and was running a body lift of 3 inches. I would tuck every thing up higher and run the piping up in between the frame and the body. that way it'll be harder to knock off on a rock.
Who is online
Users browsing this forum: No registered users and 52 guests