Heim Joints
Posted: Mon Dec 16, 2002 4:19 pm
Where do I buy heim joints from? Just a normal fastener supplier? Blackwoods? Any suggestions?
i get mine from general bearing co
try bolt and baering shops too!
8)
Page 1 of 1
Posted: Mon Dec 16, 2002 4:33 pm
Posted: Mon Dec 16, 2002 6:42 pm
CBC
Is where i am going to go - yes buddy from DIGGA 8)
Is where i am going to go - yes buddy from DIGGA 8)
Posted: Mon Dec 16, 2002 8:11 pm
As in CBC Bearings?
Posted: Mon Dec 16, 2002 10:44 pm
Just be aware, "not all heim joints are created equal" They come in many configurations and materials.
If you want the best, get Chrome/Moly ones, they are more expensive but they're much harder to break. Aurora and QA1 are amongst the best.
Regards Andrew.
If you want the best, get Chrome/Moly ones, they are more expensive but they're much harder to break. Aurora and QA1 are amongst the best.
Regards Andrew.
Posted: Mon Dec 16, 2002 11:06 pm
They won't be for use in suspension linkages rather in an anti wrap bar rot the rear diff. As such, will the strength issue be all that important?
Posted: Tue Dec 17, 2002 7:34 am
beebee wrote:They won't be for use in suspension linkages rather in an anti wrap bar rot the rear diff. As such, will the strength issue be all that important?
dude, CBC is a bearing company, and like i said "general bearing CO" they are heaps cheaper than $CBC$
see where i said it just up there? information given!! READ!
the strength isnt important, just get the little $25 each ones, the bigger ones are like $80 or $90 each and are not really worth it, you could bush every joint on your wrap bar, if you have everything set where you want it, heims are only on mine to adjust it a little, when i change springs and move things around!
also bubs, unless you are gunna get heaps of them cheap and hook up us other members of the boards, we dont wanna hear about how you gunna get it cheap! (CAUSE WE DONT CARE)
Posted: Tue Dec 17, 2002 7:52 am
tractor supply store.....massey 
Posted: Tue Dec 17, 2002 8:38 am
zzzz wrote:tractor supply store.....massey
thats where i got mine from, $40 for a complete top link which comes with 2 1.25inch thread joints. (one is left hand thread though)
Posted: Tue Dec 17, 2002 12:37 pm
I suppose I could get a long travel spline joint from the tractor place too! - Like killing two birds with one stone!
BJ - Sorry if I don't hang out at beraing suppliers as much as you but I hadn't heard of general bearing company before. There is (according to the white pages) only one general bearing co in brisbane at morningside so I can be forgiven for not knowing that off the top of my head. CBC on the other hand has 7 sales offices across brisbane and as such I had heard of them before which is why my ears pricked up when bubs mentioned it! Thanks for the tech though. I think that I'll need to use the threaded joints as I'm not sure how long my suspension setup will stay the same. Even at $25 ea and allowing for 3 of them, the price quickly jumps up. Maybe I will have to trek over to your general bearing co and tell them BJ sent me
BJ - Sorry if I don't hang out at beraing suppliers as much as you but I hadn't heard of general bearing company before. There is (according to the white pages) only one general bearing co in brisbane at morningside so I can be forgiven for not knowing that off the top of my head. CBC on the other hand has 7 sales offices across brisbane and as such I had heard of them before which is why my ears pricked up when bubs mentioned it! Thanks for the tech though. I think that I'll need to use the threaded joints as I'm not sure how long my suspension setup will stay the same. Even at $25 ea and allowing for 3 of them, the price quickly jumps up. Maybe I will have to trek over to your general bearing co and tell them BJ sent me
Posted: Thu Dec 19, 2002 1:10 pm
beebee wrote:I think that I'll need to use the threaded joints as I'm not sure how long my suspension setup will stay the same. Even at $25 ea and allowing for 3 of them, the price quickly jumps up.
why use 3 heim joints, what i have done is used threaded rod to make the diff ends adjustable and a heim joint at the other end.
Posted: Thu Dec 19, 2002 1:15 pm
why do you want it adjustable at that end?? To put some pre-load on the housing??
Posted: Thu Dec 19, 2002 1:42 pm
to allow for future suspension changes or pinion angle changes.
Posted: Thu Dec 19, 2002 2:24 pm
it does need to be adjusted for different height of springs, and different pinion angles
SORRY that my saying that you cna get them from a bearing shoppe
in future, i wont answer any more questions, i will just carry on wtih useless nonsense
SORRY that my saying that you cna get them from a bearing shoppe
in future, i wont answer any more questions, i will just carry on wtih useless nonsense
Posted: Thu Dec 19, 2002 5:50 pm
BJ I appologise for my smart ass reply. I was out of line, especially considering that you were the first to reply to my question. 
Killalux have you used bushes at the diff end or is it just metal to metal?
Killalux have you used bushes at the diff end or is it just metal to metal?
Posted: Thu Dec 19, 2002 5:59 pm
on mine i cut the eye ends off my standard hilux front shocks and welded them on.
the above pic is not actually mine but it is the same design
the above pic is not actually mine but it is the same design