swaping bodys
Posted: Tue Nov 04, 2003 3:35 pm
just wanted to know if a stockman body will fit on a w/t chassis
cheers daniel
cheers daniel
i guess that gets you part of the way there
Page 1 of 1
Posted: Wed Nov 05, 2003 11:50 am
I'm not sure about a stockman and w/t chassis, but i do know that a nt 1.3 body will fit a w/t chassis. But i don't think that a 1L body would do so - or at least, it wouldn't be as easy - some of the body mounts would be different... but this would just mean having to use longer bolts etc rather than using the captive bolts that the current w/t body would have in some of the floor mounts.
i guess that gets you part of the way there
i guess that gets you part of the way there
Posted: Wed Nov 05, 2003 12:37 pm
The stockman is a 1.3 isnt it ??
If so should go on same as narrow track sierra 1.3
If its a 1.0 you should still be able to get it to fit, but your tranny tunnel etc may need a few mods as 1.0 tunnel is narrower than 1.3 model
If so should go on same as narrow track sierra 1.3
If its a 1.0 you should still be able to get it to fit, but your tranny tunnel etc may need a few mods as 1.0 tunnel is narrower than 1.3 model
Posted: Wed Nov 05, 2003 12:48 pm
love_mud wrote:The stockman is a 1.3 isnt it ??
If so should go on same as narrow track sierra 1.3
If its a 1.0 you should still be able to get it to fit, but your tranny tunnel etc may need a few modas as 1.0 tunnel is narrower than 1.3 model
The stockman/ute came out in 1.0 and 1.3 I think
Posted: Wed Nov 05, 2003 9:27 pm
yeah i got a 1lt stockman ute.