Page 1 of 1
need the gurus help
Posted: Wed Nov 29, 2006 8:35 pm
by dreama
what is the exact diametre on the bolt that goes through the control arms
on a 100s cruiser and is it the same as the 80s
cheers Aron
Posted: Thu Nov 30, 2006 5:40 am
by -Richo-
are you talking about the rear control arms? or the radius arms in the front?
Radius arms are 16mm at the diff mount and 18mm at the chassis mount.
bolts
Posted: Thu Nov 30, 2006 2:10 pm
by dreama
in the rear control arms
Posted: Thu Nov 30, 2006 2:27 pm
by Roctoy
pretty sure it's 16mm dia
bolts
Posted: Thu Nov 30, 2006 5:56 pm
by dreama
they actual measure 18 and a bit mm i thought they might be imperial
cause an 18mm drill bit is a bit sloppy through the bush
Posted: Thu Nov 30, 2006 9:50 pm
by -Richo-
Its japanese, it would be metric, its supposed to have a bit of clearance.
bolts
Posted: Fri Dec 01, 2006 3:49 pm
by dreama
thanks for the imput