Page 1 of 1
WT V's NT CVs will they fit
Posted: Wed Nov 29, 2006 10:48 pm
by nicbeer
Hey
Wondering if NT and WT cvs are the same? I know axles are different length but wondering cvs as i have a few NT fronts spare but no WT ones.
Nic
Re: WT V's NT CVs will they fit
Posted: Wed Nov 29, 2006 11:04 pm
by christover1
nicbeer wrote:Hey
Wondering if NT and WT cvs are the same? I know axles are different length but wondering cvs as i have a few NT fronts spare but no WT ones.
Nic
I haven't tried it. But.
I'm told they are the same, and will fit onto the axle, but usually when busting a cv, you often knacker the splines on the axle, and need to replace it, too.. can be a trick to fit them on, nasty little circlip type thin can be a pppain
Posted: Sat Apr 21, 2007 1:11 pm
by nicbeer
Any more on this?
Looking at what to keep as spares and what to get rid of. as got a few NT cvs around.
Posted: Sat Apr 21, 2007 6:23 pm
by ljxtreem
WT and NT 1.3 are the same, NT 1ltr are smaller,
NT 1.3 CV's and axles will fit into a 1ltr front diff, and are stronger.
I have done this
Mock
Posted: Sat Apr 21, 2007 7:09 pm
by Zute
Will 1ltr 4.1 crown & pinon gears fit on a 1.3 NT diff centre ?
Posted: Sat Apr 21, 2007 9:27 pm
by ljxtreem
Zute wrote:Will 1ltr 4.1 crown & pinon gears fit on a 1.3 NT diff centre ?
No,
the centre is phisicly smaller, but the side gears are the same spline size and count.
Mock
Posted: Sun Apr 22, 2007 10:07 am
by Gwagensteve
hehehehe and 1.0 litre rear and 1.0 front diffs are totally not interchangeable, even the ring gear is different. Tried all sorts of combinations there.
Steve.
Posted: Sun Feb 24, 2008 10:27 pm
by nicbeer
Hey all,
How hard is it to change the axles on the CVS?
I have spare NT cvs round here but no WT ones. I am thinking about buying some of the axles off dank to suit a WT and swapping the NT axles over to WT ones for spares?
Possible? and how hard.
nic