Page 1 of 1
Does this look ok for welded diff - inside pics now
Posted: Thu Nov 30, 2006 7:51 pm
by nicbeer
I had bought this previously with a locker, never looked at it. Does this look ok for a welded diff for the rear. Combining it with a powertrax locker in the front. Not a daily driver but will need to sometimes.
Both sides are done the same
Thanks
Nic
Posted: Thu Nov 30, 2006 8:05 pm
by Guy
MORE the weld looks OK .. but is WAY not enough, pull the bolt on bit off .. weld ALL the wat around it (either to the civer or to the centre) and you should be good .. bit that weld you have now will break in 10 mins
Posted: Thu Nov 30, 2006 9:16 pm
by nicbeer
ok, here are some inside pics. Looks well welded to me.
I managed to get access to a rattle gun.
Nic
Posted: Thu Nov 30, 2006 10:03 pm
by RB zook
that should be good
Posted: Thu Nov 30, 2006 10:35 pm
by Guy
Thats alot more like it ...
Posted: Fri Dec 01, 2006 12:29 am
by nicbeer
Sweet cheers.
Anything that needs to be done specifically when setting this up in a diff hemi? apart from doing slack (backlsh)??
Nic