Page 1 of 1

holden 308 conversion into MQ83 lwb

Posted: Sun Dec 03, 2006 8:17 pm
by MQ83=MUD
Hi all ,
Just fitted a Holden 308 V8 into my MQ it was running a L28 petrol motor with power steer ,

My queery is can i adapt the holden pump to the nissan box and are they compatible to run together ?? as in pressure ??
Or do i have to run the nissan pump ??

Any info would be a great help ,,

thanks Rick :?

Posted: Sun Dec 03, 2006 8:35 pm
by ludacris
They should be compatable. Holden pump should be good.

LudaCris

Posted: Mon Dec 04, 2006 8:38 pm
by MQ83=MUD
thanks for the reply mate ,, but i adapted the nissan pump with no dramas and used the original hoses too ,,

I am using the holden alternator which has a built in reg and the nissan has an external reg which has a crap load of wires coming from it ???

Which wire goes to the alternator ???

and after removing the external reg and disconnecting from harness i have ten wires and its a bit confusing to me ??

Can anyone help ?? thanks again ,, Rick,