Outer Limits 4x4 Board

Been away a couple of years so I am out of touch, has any body chopped a station wagon and super glued the back of a ute cab on. is there a better way of doing this, this topic would no doubt have been discussed before so I aplologise if re hashing. just point me in the right direction fellas, I have the wagon body etc just waiting on a ute back
thanks johno

mate of mines got a MQ thats been done! it definatley is possible!

hey mate, plenty have done this, there is a few threads in the members section on different ideas. On Track??? in slacks creek??? do a plate for the rear, if your quarters are aok, that steel will then plate up the gap between the pillar. the back plate has ribs pressed in, but the window hole is not cut so you can cut to any size or pre made size you want.

Try ozy1 build, big green meany and I am sure a few more will get on here and let you know some of the others (I have a short memory) there is also a build on the members section at www.ozx4.com with a dual cab that looks good, plenty of pics there.

Tiny, Please consider me a very blunt knife in a drawer of very sharp ones. How do I find all that stuff you mentioned. I'm a virgin with all this computor stuff, so be gentle
thanks johno

i am in the middle of doing this now using the back door section for the back of the ute cab making new rear quater windows and cutting the middle pillar out of rear door for a one piece window (well thats the plan) can post pics when its tacked together if you want

I would really appreciate that, if its not to much trouble some pics as you go along to would be great. my email is jcrees@westnet.com.au so you can send direct if that works for you. many thanks
johno