Outer Limits 4x4 Board

I tried to searched but i suck at it

Alright i have been hooking up some speakers in my car this morning in the frigan heat and they go awsome untill you turn it off!

Then you turn it on and they no workie !

To make them work you have to re do up all the earths.

IS THERE ANY REASON IT'S DOING THIS? IS THERE SOMTING EASY TO FIX IT?

THANKS

Need a little more info on what speakers and Head Unit your running.
Also are you using the factory wiring?

OK

I have a sony xplode cd player with 2 6X9's running through a clarion amp( all on it when i brought it) and i went to put some little 4" speakers in through the amp as well!

Now the 6X9's always work but you can get the little speakers to work untill you turn the key to start it then only the 6X9's work!

ANY HELP WOULD BE APRETIATED!

Sounds like one or both of your speaker wires are grounding. Check that the wiring is correctly insulated and the connections on the back of the speaker are not touching anything (door skin).

RAY185 wrote:Sounds like one or both of your speaker wires are grounding. Check that the wiring is correctly insulated and the connections on the back of the speaker are not touching anything (door skin).

Never thought of it being the back of the speakers!

I will definatly cheak that! THANKS HEAPS

wat ray185 said. i had the same prob so i trimmed the door back a lil bit.

I worked out wahst it was but i probably shouldn't tell you all!

I WILL I had each speaker earthed! But it all had to go through the amp and then the amp has it's own earth!

I worked it out so i was still happy !

THANKS FOR THE HELP!