Outer Limits 4x4 Board

I've got a welsh plug which won't budge from the exhaust side of my engine under the extractors. It's pretty bloody big, and needs to be removed due to a light leak.

I've tried knocking a hole in it and levering it out, and tried to punch it in from the rim, but she won't bloody budge!

Any tips anyone? please

Hit it harder.

if that fails............















hit it harder

u need to cool the welsh plug quickly. Wurth have stuff called "rost off ice" has worked in the past.

Simon

Ay aerosol can at close range will cool it down a little bit, so grab your can of aerogard and get to work.

Try the spray on burn cooler stuff you get to put on burns, cums out of the can F@#%*n cold. Heat the aera with a gas torch first, then cool the plug, then hit it.

Used this stuff to get a stuck and pre rounded sump plug outa a Perkins diesel sump in the padock on day, suprised how much diferance it made.

Got it out! Yay, used a big fuck off masonry chisel and a 3kg mallet, just gotta pull it out of the hole now and i'm done, yay!

Thanks for your help guys

LOL

Glad you got it out.

When in doubt, use a bigger clout .

Brute force and ignorance