Page 1 of 1
Feroza to Sierra
Posted: Thu Dec 14, 2006 9:16 pm
by Sean
G'day,
Has anyone heard of a 1.6 from a feroza that has been put in a sierra? i have heard the the vit and roza engines are similar.
cheers,
Sean
Posted: Thu Dec 14, 2006 9:48 pm
by cj
Why would you? The Vit is pretty much a bolt in.
Posted: Fri Dec 15, 2006 12:40 am
by Sean
well there is the limiting factor of supply and cost.
Posted: Fri Dec 15, 2006 6:46 am
by lay80n
Feroza would be step backwards as far as driveline. You would not be able to get the gearing options available.
Layto....
Posted: Fri Dec 15, 2006 11:12 am
by Sean
alrighty, thats all i needed to hear
cheers,
Sean
Posted: Sat Dec 16, 2006 7:46 am
by Drover_Pete
lay80n wrote:Feroza would be step backwards as far as driveline. You would not be able to get the gearing options available.
But if you used the Feroza motor / gearbox you would still have the Suzuki transfer box and diffs...and therefore the gearing options?
Posted: Sat Dec 16, 2006 10:44 am
by lay80n
Drover_Pete wrote:lay80n wrote:Feroza would be step backwards as far as driveline. You would not be able to get the gearing options available.
But if you used the Feroza motor / gearbox you would still have the Suzuki transfer box and diffs...and therefore the gearing options?
Only if you buggered round removing the roza T-case from the back of the motor, or made dual cases by modifying the roza case. If the bloke was worried about the extra cost of getting a VIT motor over a roza, then i hardly thing this would be a better option
Besides the obvious part that the vit is a almost drop in conversion, and the roza is much more involved.
Layto....