Page 1 of 1
TJ Body lift
Posted: Wed Dec 20, 2006 6:03 pm
by joel HJ60
Same mate as before, looking to do a 2" b/l. Any advice/prices would be handy. Thanks
Posted: Thu Dec 21, 2006 8:01 am
by stu
most go with a 1" BL cause the 2" looks wrong also theres less complications with a 1" BL.......with a 2" its recomended to get a 1" motor mount lift too.
Order from the states or a jeep specalist to ensure you get all the correct bits or PM Wooders on this forum has he deals in this stuff
the hardest thing would be to stuff around with the radiator shroud.....you'll find out
Posted: Mon Jan 15, 2007 12:23 pm
by joel HJ60
How many blocks would be needed to lift the Jeep? Is it 12, 6 down each side?
Posted: Mon Jan 15, 2007 9:25 pm
by alka
11 mate here some good instructions and pics where they are
http://www.4x4xplor.com/bl.html
Posted: Tue Jan 16, 2007 7:05 am
by joel HJ60
What a rippa of a write up, thanks alka!
Posted: Wed Jan 17, 2007 10:30 am
by joel HJ60
What diamter are the blocks needed?
Posted: Wed Jan 17, 2007 7:37 pm
by alka
hmm not sure hopefully i'll be able to tell u once i take mine off this weekend...if all goes well...but knowing my luck probably go pear shaped :-(
Posted: Wed Jan 17, 2007 7:39 pm
by tropey
50mm is the average