Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RA Rodeo Suspension Arms

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 102
Joined: Wed Oct 08, 2003 7:46 pm
Location: Brisvagus

RA Rodeo Suspension Arms

Post by Black_TJ »

Does anyone know of an front replacement arms for the RA? Looking for 3 - 4 inche lifted arms?

Can find them for the previous model but not RA. Surely someone makes something. If not what other options are there with the front end?
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Tiny on here sells and/or makes them for the RA's.
They're called Smart Lift or something.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 102
Joined: Wed Oct 08, 2003 7:46 pm
Location: Brisvagus

Post by Black_TJ »

Thanks.... I PM'ed Him awhile ago. am waiting on a reply.

In the mean time i have managed to get 3 inches out of the standard arms
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Black_TJ wrote:Thanks.... I PM'ed Him awhile ago. am waiting on a reply.

In the mean time i have managed to get 3 inches out of the standard arms
Do you mean you wound up the torsion bars or actually modified the arms?
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 102
Joined: Wed Oct 08, 2003 7:46 pm
Location: Brisvagus

Post by Black_TJ »

Replaced torsion bars. Have tracked down droped upper arms from 4wd USA however looking under it I think i will manufacture my own. There isn't alot involved in it.

Here's a pic of the project so far.....
Image
Posts: 3
Joined: Sat Oct 07, 2006 10:43 pm

Post by Shagg's »

Black_TJ wrote: I think i will manufacture my own. There isn't alot involved in it.

Here's a pic of the project so far.....
Image

What with Paddle pop sticks and glue ? :finger: :finger: :finger:
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

Shagg's wrote:
Black_TJ wrote: I think i will manufacture my own. There isn't alot involved in it.

Here's a pic of the project so far.....

What with Paddle pop sticks and glue ? :finger: :finger: :finger:


First he has to fab up a booster seat so his rubber vagina can see over the dash. :finger: :finger:
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

basketcase wrote:
Shagg's wrote:
Black_TJ wrote: I think i will manufacture my own. There isn't alot involved in it.

Here's a pic of the project so far.....

What with Paddle pop sticks and glue ? :finger: :finger: :finger:


First he has to fab up a booster seat so his rubber vagina can see over the dash. :finger: :finger:
just keep away from his bonnet this time Dan
www.bolsys.com.au

the original and the best
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests