Outer Limits 4x4 Board

Thought I'd put this here since it's more relevant to LRs than in the generic section.

I'm after the warning lamps for the Handbrake & Parking Lights from a 1981 RR. Mine weren't there when I bought the thing and now I've worked out which wires are for what, I'd like to have them working. So it's the bit that illimunated bit that fits between the dash console and steering column.

Cheers
Stu

If you don't get any local, give me a bell, I hate posting shit especially when its worth fark all, oh i mean lots

Try "British off Road" up near Forest Glen on the Sunshine Coast.

Good mob to deal with! Ph: 07 5445 1094

Cheers.....................Pete!

Righto, i'll post you some, PM me with details

HI guys,

Still looking for some of these.

Also, the door lock rods which run, internally, from the external door look to the internal one. Been wondering why the doors never locked and just assumed I needed another key which I didn't get when I bought the car. So on the weekend I pulled off the lining and it seems as though there were none there in the firts place!! Wouldn't mind being up to lock the car up without having to climb in the back over the LPG tank, back seat, etc....!!

Cheers

Stu

Are they the same on an 83rr? we are wrecking my dads 83 and have compelte doors that locked and all the dash parts of out it.

parts in perth tho.

Lucus wrote:Are they the same on an 83rr? we are wrecking my dads 83 and have compelte doors that locked and all the dash parts of out it.

parts in perth tho.

If it's a 2 door, then the rods should be right (but I don't need the whole door I have another set under the house but they don't have the rods either!) otherwise for the lamps, they are the hooded variety and sit below the instrument binacle. I'd imagine they would be the same but someone else may know?

Haha wasnt trying to sell you the whole door mate. Just wanted you to know they where complete. Unfortunatly the old mans car is a 4 door.

I know the lights you mean they have black shrouds on them, I'l ask my dad what he wants for them...

Cheers Lucas

He's going to find them in the shed and make sure there okay. He said he'd take a carton of beer for them.

frieght for those should be bugger all.

i'l let you know how he goes.

cheer

Luke

Can't help you with the light, but would the coor lock rods from a 2 x door Disco help?

disco95 wrote:Can't help you with the light, but would the coor lock rods from a 2 x door Disco help?

Certainly would!

I think the ends (cups) turn brittle, being plastic. I have the 2 rods but the plastic ends have broken.

PM me the details.

Cheers

Stu

Hi,

You can make cup replacements out of 12mm plastic irrigation pipe saddles. Just cut in half, drill a hole just smaller than the ball near the cut and press over ball. The existing nail holes in the saddles thread nicely on the rod between the key and lock.

DL