Page 1 of 1
isuzu 4bc2
Posted: Tue Dec 26, 2006 4:15 pm
by cooter
need head tensions for this engine if any1 can help
cheers
Posted: Tue Dec 26, 2006 4:23 pm
by Loanrangie
Wait till tomorrow when an isuzu place will be open, what are the specs of that motor ?
Posted: Thu Dec 28, 2006 10:18 pm
by cooter
3.3L di ohv
Posted: Tue Jan 02, 2007 12:44 pm
by stevo_K
hey cooter
from the book i have 114 nm
cheers steve
Posted: Wed Jan 03, 2007 2:51 pm
by ISUZUROVER
Should be the same as 4BD1, but I just packed my manual to move house. Will try and remember to check tonight.
Posted: Wed Jan 03, 2007 8:19 pm
by stevo_K
4bd1 head tension are torque to yield same as 4bd1-t, which works on 3 steps. 1st step 70 2nd 90 then +90-120 deg.
4bc2 is one step 114.00nm
this info is from a tech spec book that we used then reconditioning all
jap engines.
hope this helps
cheers steve
Posted: Wed Jan 03, 2007 9:50 pm
by cooter
cheers fellas