Page 1 of 1
starter motor problems with 1.6 conversion
Posted: Fri Dec 29, 2006 10:23 pm
by Daniel
i have a 1.3 starter at the moment....
i have a conversion (adapter plate) on the gearbox... my 1.3 starter does not fit.. in oder for it to fit i neeed to file or grind away at the block.. i do not want do that.. what can i do?
get a 1.6 starter... or another type of 1.3 starter...
alll i need to start the bastard is a starter.. please help
Dan!
Posted: Sat Dec 30, 2006 1:06 am
by bazooked
man which country u from???? just grind ur starter , takes about 2 mins.
Posted: Sat Dec 30, 2006 5:58 pm
by Daniel
australia mate... melbourne
ye but can i get another starter to just bolt up....
Posted: Sat Dec 30, 2006 6:19 pm
by redzook
Daniel wrote:australia mate... melbourne
ye but can i get another starter to just bolt up....
i tink he was talken bout ur engrish mate
Posted: Sat Dec 30, 2006 7:54 pm
by Daniel
this is what he asked me
"man which country u from????"
and i said i am from Australia... Melbourne....
where in all of that does it say anything about where my engine might have come from??
Dan!
Posted: Sat Dec 30, 2006 8:03 pm
by =SKB=
Posted: Sat Dec 30, 2006 8:04 pm
by =SKB=
bazooked wrote:man which country u from???? just grind ur starter , takes about 2 mins.
redzook wrote:Daniel wrote:australia mate... melbourne
ye but can i get another starter to just bolt up....
i tink he was talken bout ur engrish mate
Daniel wrote:this is what he asked me
"man which country u from????"
and i said i am from Australia... Melbourne....
where in all of that does it say anything about where my engine might have come from??
Dan!
Posted: Sat Dec 30, 2006 8:27 pm
by bazooked
Posted: Sat Dec 30, 2006 8:54 pm
by Daniel
im tripping out hahahahhahah rofl
so ill just grind the fucka away
it just seems to be alot to ghrind.... i may have a diff starter motor to you though...
will a vitara starter bolt straight up.... with my adapter plate...
Dan!
Posted: Sat Dec 30, 2006 10:13 pm
by SLOGQ
Just grind the starter away dude, takes about 5 min with a 4 inch grinder, take a patch about an inch wide off where it rubs on the block and its all good............
Posted: Sat Dec 30, 2006 10:39 pm
by Zute
Do you get it
Grind the starter. Not the BLOCK.
Posted: Tue Jan 02, 2007 9:25 pm
by Daniel
ye ye i get it...
starter not block.
cut away the section that it rubs on...
no need to file the block????
Dan!