Outer Limits 4x4 Board

Hey guys,
does anyone know if u can put seats from a 1.3 into a 1litre. ie: are the mount any different.??

Does any one know where to look apart from wreckers>

I believe they are different, but I bolted in bucket seats from AutoBarn in my NT basically swapped the sliders on the new seats and bolted them back in.

I have a pair of new bucket seats very similar to the ones above that I bought from a suzi 4x4 place in perth for $400 a month ago. They havent been installed so are completely unused thus I'm trying to sell them for $300 if you are interested.
0408 796 228

i have camira seats in my 83 nt lwb and fit with out much modifacation
http://i142.photobucket.com/albums/r113 ... G_2016.jpg

I have changed mine over to some after market seats i got off ebay for $250 the pair.

They did fit with no mods, i am unable to give anymore info than what written on them and all that is is R1 written on the head rest.


Cheers
Simon..

I have a 1 litre maruti which I imagine has the same seat mounting.

Im in the middle of putting in a set of 90's model swift/barina, they come very close to bolting in, they cost me $105 for a pair at a self serve wrecker.

I'll post up a few pictures tommorrow when Im done

Brendan

Here is a basic write up and pic on how I put the seats in my car http://carl.outerlimits4x4.com/viewtopic.php?t=96253