Outer Limits 4x4 Board

Posted: **Wed Jan 03, 2007 8:20 pm**

hey i was wondering if anyone has done a conversion with a SR20DET in a vitara

Posted: **Thu Jan 04, 2007 7:52 pm**

yes there is one done down here some where ive seen it once

Posted: **Thu Jan 04, 2007 8:59 pm**

have you talked to the guy i am wondering what gearbox would be used and wat mod you would do to get it in

Posted: **Thu Jan 04, 2007 9:06 pm**

http://carl.outerlimits4x4.com/viewtopi ... 20det+zook

Id say its missing some pics by now ......although I think christover1 may chime in with some info

Dan

Posted: **Thu Jan 04, 2007 9:12 pm**

Santos wrote:
hmmm.. what i want to know is how is the auto RWD box made 4wd?
i skimmed through the thread and you know i can't find any details..

Custom made Jack shaft from output of auto to the standard Sierra/Sammy transfer case, though its in a custom position.. It is a LWB so plenty of room.

I have a million pix of the build, can't put em all up, but if asked for specific issues, I can put up some of them.

christover

A quote from the thread ....I say he ran the SR AUTO RWD box

Dan

Posted: **Thu Jan 04, 2007 9:22 pm**

A1 wrote:Santos wrote:
hmmm.. what i want to know is how is the auto RWD box made 4wd?
i skimmed through the thread and you know i can't find any details..

Custom made Jack shaft from output of auto to the standard Sierra/Sammy transfer case, though its in a custom position.. It is a LWB so plenty of room.

I have a million pix of the build, can't put em all up, but if asked for specific issues, I can put up some of them.

christover

A quote from the thread ....I say he ran the SR AUTO RWD box

Dan

From memory its a hybred (or that may have been the manual box he ran earlier .. not sure)

Posted: **Thu Jan 04, 2007 9:30 pm**

Yeah ....im only going off what I read above.....im sure people will chime in ....

Posted: **Thu Jan 04, 2007 11:26 pm**

that build up thread is for a sierra and from the first post on this thread he was talking about putting it in a vitara

Posted: **Fri Jan 05, 2007 9:02 am**

but he also asked what Gearbox to use and that was what I was replying to ........so the thread should still be able to help ......

.....

Either way Id say he's going to have to use a RWD SR box .....unless adaptors are his fortay (sp)

Dan

Posted: **Sun Jan 07, 2007 3:10 pm**

love_mud wrote:
A1 wrote:Santos wrote:
hmmm.. what i want to know is how is the auto RWD box made 4wd?
i skimmed through the thread and you know i can't find any details..

Custom made Jack shaft from output of auto to the standard Sierra/Sammy transfer case, though its in a custom position.. It is a LWB so plenty of room.

I have a million pix of the build, can't put em all up, but if asked for specific issues, I can put up some of them.

christover

A quote from the thread ....I say he ran the SR AUTO RWD box

Dan
From memory its a hybred (or that may have been the manual box he ran earlier .. not sure)

the original gearbox was an sr20 front section with an early 240-260z or skyline extention housing witch also needed machining to accpet the larger silvia bearings.
it may still be for sale. you could find out through christover if its avalible.

hope that helps a little

cheers daryl

Posted: **Mon Jan 08, 2007 8:51 am**

Not sure how it would go in the zook, but the SR20 gearbox's are known to be weak (I am talking circuit racing here) People upgrade them to a RB25 (R33 Skyline) Gearbox.

Could be worth considering for the conversion...not sure how hard 4x4 is on the gearbox?

Price wise, you are looking at around $400 for a SR20 box, and $1000+ for a RB25 box....

If you are chasing SRs and RBs look at

http://www.nissansilvia.com
and
http://www.skylinesaustralia.com

Outer Limits 4x4 Board

SR20det

SR20det