Outer Limits 4x4 Board

ok my brain isnt working today, and i need some good ideas where to put my gas filler. im about to build a new rear bar and dont want to put the gas filler back were it is, because it disterbs my were it is and i allways seem to bend the bumper bar only on that side.

the first place i wanted to put it was next to the petrol filler but it wont fit.



............thats the little bastard, right there ^

so any help would be great, cheers scott

between petrol filler and tail light... just bury a new hole in it.

or just make the bar stronger where the filler is on the new bar

bogged wrote:between petrol filler and tail light... just bury a new hole in it.

yeah that might be the go, i love cutting holes , cheers scott

Yeah, mine is in the rear bar and it's really annoying. Too low down for comfortable filling.

This may sound over the top, but what about getting a filler lid and the surround and all that from a wrecked Patrol, and actually make a second lid?

chimpboy wrote:Too low down for comfortable filling.

That's where those black gas keys come in handy, the ones to undo the caps. Just wedge it inbetween the trigger and the surround, keeps it on and don't have to hold the trigger. Aparently an old spark plug does the same.

Can u fit it right next to the petrol filler under the existing flap?? Thats where mine is on my gq.

Jimbo wrote:Can u fit it right next to the petrol filler under the existing flap?? Thats where mine is on my gq.

g60boy wrote:the first place i wanted to put it was next to the petrol filler but it wont fit

I suppose it helps to read the whole post not just the first line.

Jimbo wrote:I suppose it helps to read the whole post not just the first line.

we've all done it...

chimpboy wrote:Yeah, mine is in the rear bar and it's really annoying. Too low down for comfortable filling.

This may sound over the top, but what about getting a filler lid and the surround and all that from a wrecked Patrol, and actually make a second lid?

not a bad idea , but theres not much room inside the panel. i think it might work if i can get a 90deg bend between the hose and the filler conection.

maybe if i can hack a new lid out of a gq that would give me heeps of room and not look to out of place.

bogged wrote:

Jimbo wrote:I suppose it helps to read the whole post not just the first line.

we've all done it...

not me

Shadow wrote:

bogged wrote:

Jimbo wrote:I suppose it helps to read the whole post not just the first line.

we've all done it...

not me

or me

My gass kit fitting both the petrol filler and the gas filler are under the petrol tank cap. They had to slightly move the petrol one and remove the plastic cap holder.

Thus if the GQ and MQ trapdoor are the same size it definately can be done. If you need a shot of it let me know.

Beastmavster wrote:My gass kit fitting both the petrol filler and the gas filler are under the petrol tank cap. They had to slightly move the petrol one and remove the plastic cap holder.

Thus if the GQ and MQ trapdoor are the same size it definately can be done. If you need a shot of it let me know.

a pic would be awsum thanks, the gq filler door is about 50mm bigger lenth and hight ( i just had a look at mums gq before ). cheers scott

g60boy wrote:

Shadow wrote:

bogged wrote:

Jimbo wrote:I suppose it helps to read the whole post not just the first line.

we've all done it...

not me

or me

we are all individuals.....

your a wizz bogged