Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

holden 308 into swb mq...can anyone help me please?!?!?!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 11
Joined: Sat Jul 29, 2006 8:19 pm
Location: newcastle area

holden 308 into swb mq...can anyone help me please?!?!?!

Post by CAMOMQ »

Gday all ive just started this conversion i have everything i need I THINK...the L28 is out and i have a empty engine bay,i have a dellows conversion kit and the motor i have has the sump drop at the front of the engine im abit worried that this is going to hit on my diff on installation? also my mate said i might have to get a larger sump to overcome oil loss to mains on hill climb...please anyone who has done this conversion could you please help me as i need this completed by next week
any help would be muchly appreciated
many thanks daniel.
CAMOMQ , worked 308 straight gas,runnin 33" m/t,1 3/4" bodylift,full gq panel conversion/front end,custom front bar with 4spotties,gloss black paint,custom tube tray
Posts: 78
Joined: Wed Sep 06, 2006 8:08 am
Location: Seaford Victoria

Post by MQ83=MUD »

hey mate i hope all the pics and imfo i sent helps you heaps ,, good luck on your mission ,,
my conversion took me a week to do by myself ,,and it was worth every cent ,, and all the bleeding and bruised knuckles :D
FIND MUD AND PLAY HARD
308 powered MQ LWB / 35 bfg mts /snorkle /grunt
Posts: 60
Joined: Mon May 29, 2006 6:02 pm
Location: newcastle

Post by rickstrap »

yer the v8 is worth every bit sump has to go to the front so the exhaust runs between the sump and flywheel because of front drive shaft man yule screem blue murder till you turn the key for the first time are you going 4 or 5 speed
93 gxl 4 inch lift locked partime kit 35 micky thompson bajaclaws
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

There are 2 sumps.

a front sump which all the commodore 304 5 litre motors have.....
and a rear sump, which all of the older holden (HJ,HQ,WB) etc have.....

now, one thing to note, they have a different oil pick up as well. the rear sump is a longer pickup that drops into the sump at the back ( as it bolts to the block at the front.... the front sump ones still bolt to the block at the front but drop in more in the middle of the sump.

so when converting to rear sump, you need to remove the oil pickup as well and put one from a rear sump. if you try to use the front sump pickup with a rear sump, you will have no oil pressure as the pickup wont be in the bottom of the sump to get oil.

you can get rear sumps from any old holden motor, all red motors and blue motors had them. the black motors and injected motors have front sumps. all are interchangeable.

next thing is next.... are you intending on converting to a 5 speed or an auto at any stage or sticking with the 4 speed?

i ask this as the 4 speed sits soo far back that if you bolt a 5 litre to it, i think you will find you will get away with a front sump anyway as long as you mount the motor high enough it will never hit the diff cause the motor sits back because of the 4 speed. If you put a 5 speed in then it will hit.

you choice all in all but eitherway, the info is here for you. i have done half a dozen v8 conversions now and a few chevs as well soif you have any further questions feel free to ask.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests