Outer Limits 4x4 Board

I want to make up a drag link and a tie rod using gu female ends. would someone have the part number for the right hand threaded ones. I want to keep all the ends the same so i can carry only one spare. How accurate does the tow in need to be as adjustment will be one full turn.

I am guessing the thread pitch is 1.5mm without seeing one there for worst case tow would be out by 4mm or so on a 37.

cheers bru

bru I think the part No is TE135 R, We get the female ones from Autobarn
down here and thats the part No that is on the reciept.
cheers joe

thanks mate. they specify a right and a left at nissan but i was wondering if that ment right hand thread or right hand of the vehicle!

cheers bru