Outer Limits 4x4 Board

Posted: **Tue Jan 09, 2007 5:52 pm**

Gday guys..
This sounds dumb as but i went out n brought a tjm/arb tow hook kit for the front of my 94 solid ax lux today, they say easy install, yeh i have room for it at the front on the chassis rails, but it comes with the high tens nut and bolt i can get the bolt in but how the f**k am i spose to get the nut inside the chassis rail!!

without chopping into my chassis??
Thanks all

Posted: **Tue Jan 09, 2007 8:06 pm**

It should atleast be attached through both sides of the chassis, get a longer bolt and drill though.

Posted: **Tue Jan 09, 2007 8:40 pm**

or u can get the bolts to go into the threaed inserts.

M12x1.25x50mm

i believe

Posted: **Tue Jan 09, 2007 8:42 pm**

oh ok.. cheers guys, musta sounded like a dead beat askin that, i think ill get the longer bolts ay. Thanks again guys

Posted: **Tue Jan 09, 2007 10:23 pm**

Just get the right thread bolt and your chassi will have a spot to bolt it on with the nuts welded inside.

Posted: **Wed Jan 10, 2007 8:34 pm**

cheers all.. to help me with my silly lil problem!! Thanks again

Chris

Outer Limits 4x4 Board

Solid axle tow hook install

Solid axle tow hook install