Page 1 of 1
Shackle search
Posted: Wed Jan 10, 2007 7:51 am
by Puk
hi all,
Does anyone on here still make extended shackles that add about 2 inches? I am just looking to get hold of two of them.
Please let me know (or tell me what are some of the good commercial brands if anyone has had any experience with them)
Puk
Posted: Wed Jan 10, 2007 8:04 am
by suzuki boy
I was cruising snake racing and bbm yesterday looking for diff guards but they both had extended shackles!
I made mine for under $10 all you need id flat steel with some square tube in the welded in the middle! It's not hard at all!
shackles
Posted: Wed Jan 10, 2007 8:14 am
by noelb1
Make them as said $10-20 bucks worth of steel , you don't really need to brace them if you use 8-10mm bar if you cant get hold of a welder and you want to brace them 2 bolts and some crush tube in the middle of the shackle , better than paying $195 a set
my 2c
Posted: Wed Jan 10, 2007 9:04 am
by Nev
can also check out superior engineering for 2" extended shackles.
Posted: Wed Jan 10, 2007 8:07 pm
by smiley_smoke
check the nbs forums. i got a set for 150 from fatzook on there.
i am happy with em. i dont have a welder or access so was heaps easier.
there is a template for em on suziinfo.com i think..
Posted: Wed Jan 10, 2007 8:26 pm
by Puk
nbs?
Puk
Posted: Wed Jan 10, 2007 9:14 pm
by mach.25
Posted: Wed Jan 10, 2007 9:15 pm
by christover1
Posted: Fri Jan 12, 2007 5:31 pm
by Puk
suzuki boy wrote:
I made mine for under $10 all you need id flat steel with some square tube in tInhe welded in the middle! It's not hard at all!
In that case make me two of them and i'll give you $20 each!
Puk
Posted: Fri Jan 12, 2007 6:01 pm
by fool_injected