Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hub Seal Kit

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 224
Joined: Sun Jul 23, 2006 4:47 pm
Location: Cornubia

Hub Seal Kit

Post by Sean »

G'day,

I was just wondering if anyone knows of anywhere that does hub seal replacement kit?

I haver a severe leak on the drivers side locking hub.

cheers,
Sean
[quote="v840"]fat chicks actually [i]do[/i] give better head cause they're always hungry![/quote]
Top
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

Theres only 2 gaskets isn't there?

I did my wheel bearings and replaced the gaskets inbetween the hub and the axle housing and the gasket between the hub and the twisty thing!

For the four gaskets was $9 :cool: I got them from toyota but suzuki should have them! All aisin hubs use the same gaskets!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

seals r different to gaskets, i assume ur after the inner axle seal and the wiper and felt seals for the swivel hub?, if so spend the xtra get genuine zook stuff as the aftermarket stuff is crap, also it might pay to change ur swiveel hub bearings while its all apart.
buggy time............
Top
Posts: 76
Joined: Thu Mar 23, 2006 8:15 pm
Location: Perth SOR

Post by josh9465 »

suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.
Top
Posts: 219
Joined: Fri May 19, 2006 5:29 pm
Location: sydney

Re: Hub Seal Kit

Post by albey »

Sean wrote:G'day,

I was just wondering if anyone knows of anywhere that does hub seal replacement kit?

I haver a severe leak on the drivers side locking hub.

cheers,
Sean
where are you at? im in syd i just done my front axle seals n bearings i got the bearings and seals from cbc bearings-$28bearings,-$10inner axle seals.
and the wiper and felt seal from suzisport spares seven hills-$50 for 2 rubber knuckel seal and 2 felt seals sides. im not to sure how cheap that was but there was no wait for them
web sites - http://www.yellowpages.com.au/onlineSol ... 6910&st=cs

http://www.conbear.com/
Top
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

josh9465 wrote:suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.
I got my bearings and axle seals for $33 a side!

The guy over the road to wreck toyotas and remembered them yousing parts off patrol's suzuki's any thing with the aisin hubs and all compnants are the same exept for the axle spline aparantly!

So yes the two gaskets i got were off a 75 series ute but are apparently the same as the 45 ect. Just take your one down there and check but should be the same!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Top
Posts: 219
Joined: Fri May 19, 2006 5:29 pm
Location: sydney

Post by albey »

suzuki boy wrote:
josh9465 wrote:suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.
I got my bearings and axle seals for $33 a side!

The guy over the road to wreck toyotas and remembered them yousing parts off patrol's suzuki's any thing with the aisin hubs and all compnants are the same exept for the axle spline aparantly!

So yes the two gaskets i got were off a 75 series ute but are apparently the same as the 45 ect. Just take your one down there and check but should be the same!
cbc bearings-$28bearings,-$10inner axle seals.this is for both sides $38 all up and $50 for both sides wiper and felt seals
Top
Posts: 76
Joined: Thu Mar 23, 2006 8:15 pm
Location: Perth SOR

Post by josh9465 »

ive just done the king pin bearings and cups, knuckle oil seal and felt pads...the steering is like knew. much smoother and the steering doesnt shimmy.
Top
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

albey wrote:
suzuki boy wrote:
josh9465 wrote:suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.
I got my bearings and axle seals for $33 a side!

The guy over the road to wreck toyotas and remembered them yousing parts off patrol's suzuki's any thing with the aisin hubs and all compnants are the same exept for the axle spline aparantly!

So yes the two gaskets i got were off a 75 series ute but are apparently the same as the 45 ect. Just take your one down there and check but should be the same!
cbc bearings-$28bearings,-$10inner axle seals.this is for both sides $38 all up and $50 for both sides wiper and felt seals
Mine was $33 a side with the seals and every thing so $66 all up! Did i get ripped? It's all fixed now!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Top
Posts: 224
Joined: Sun Jul 23, 2006 4:47 pm
Location: Cornubia

Post by Sean »

thanks form the reply's guys,

i'm actually only after a seal for the locking hub. doing the whole hub assembly is a little to advanced for me right now.

cheers,
Sean
[quote="v840"]fat chicks actually [i]do[/i] give better head cause they're always hungry![/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest