Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux transfer qs
Moderators: toaddog, Elmo, DUDELUX
hilux transfer qs
what is the high range ratio for a 95 diesel hilux transfer case and also what is involved in twin transfer case mod??????
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
I'd say it would be 1:1 same as 2H when you understand how the toyota cases shifter/selector work you'll see why i say that. heres some links on duals and read the poll below and it sould be plenty of info
http://www.marlincrawler.com/htm/transf ... p_dual.htm
http://www.allprooffroad.com/index.php? ... view&id=18
http://www.marks4wd.com/products/advanc ... ual_tc.htm
http://www.marlincrawler.com/htm/transf ... p_dual.htm
http://www.allprooffroad.com/index.php? ... view&id=18
http://www.marks4wd.com/products/advanc ... ual_tc.htm
plenty of parts on the bench
Duals you will need the adaptor and a transfer out of a 4 speed lux. Strip the back half of the original transfer, bolt on the adaptor and bolt on the complete 4 speed transfer. A few other little things but they are in the instructions provided. You will need to move the crossmember back or it is better to get a custom one to pick up both transfers or you will tear engine mounts.(speaking from experence). And cut a hole in the tunnel about 6" back I think.
reason iam asking is that we are doin up my mates lux it now runs gq diffs and coils with 35,s and a 1uz-fe goin in this week
hiss diffs are 4.1 but were hoopin that we could gain more reduction in 2h by adding a second transfer i know a lot of 4bs have a slight reduction on high range and by adding a second high range to the mix would gain a bit more reduction would like to stay with 4.1 so that we both have the same ratio so we can use each others spares
hiss diffs are 4.1 but were hoopin that we could gain more reduction in 2h by adding a second transfer i know a lot of 4bs have a slight reduction on high range and by adding a second high range to the mix would gain a bit more reduction would like to stay with 4.1 so that we both have the same ratio so we can use each others spares
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests