Outer Limits 4x4 Board

I've tried searching but couldn't find it

does anyone know the Internal Diameter and length for the rear control arm bush tubes/bosses?

cheers

OONDY

give me half an hour and i will take mine of and let you know ,are you making some up ???

thikning about it.

cheers

OONDY

if your gunna start making rear arms oondy ill take a set of longer lowers and adj uppers. when im rich again

i just measured my spare set. id say from as close as i can get 50 mm perhapse 48 cant see exactly where the bush stops as its still in the arm

ps those front arms looked sweet

badger wrote:if your gunna start making rear arms oondy ill take a set of longer lowers and adj uppers. when im rich again

ps those front arms looked sweet

cheers for the measurement.

my mate with a jimny is chasing more flex - even though he won't listen to me regarding why its binding up - he wants to change the chassis end bush of the radius arm and i though maybe a nissan rear bush may fit. looks like it may fint indeed.

the arms i make now are heavier than the ones i made for my LWB and i can't break'em so they're pretty tough.

cheers

OONDY

for gq ones there 50mm thick and 45mm long hope ythis helps and am i say what a shit job to take one out to measure it