Page 1 of 1

Air Con Fan Control

Posted: Tue Jan 23, 2007 6:52 pm
by n_dorphin
Hey Chaps,

My air con fan doesn't work on the 2 slower settings.
The 2 highest still work.
The fan does not run but the air con light stays on.
How do I fix this?

Cheers

Jason

Posted: Tue Jan 23, 2007 7:15 pm
by -Scott-
Blown resistor in the fan control circuit. Find it, replace it.

Posted: Thu Jan 25, 2007 9:39 am
by n_dorphin
Anyone know where the resistor is located?
Might save me pulling to much of dash apart.

Thanks

Jason

Posted: Thu Jan 25, 2007 8:56 pm
by hudson44
LH side of the dash on the under side of the heater box. It will look like part of the box but is held in by 2 screws and has a plug with about 4 or 5 wires running to it.
Hope this helps...