Page 1 of 1
ebay fines
Posted: Tue Jan 23, 2007 7:33 pm
by winchin
Posted: Tue Jan 23, 2007 9:14 pm
by 6.5 rangie
Pretty sure these are Goutmans on here, had em posted a few weeks back for sale.
Goutman sorry for not getting back to you, i'm good at that. my email was there all along!
Now that i've seen them they are not what i'm after.
Posted: Wed Jan 24, 2007 6:51 am
by Goutman
thanks winchin these certainly are mine... anyone interested pm me
Posted: Wed Jan 24, 2007 10:19 am
by The Dude
hey Goutman, whats the back space measurement on these
Posted: Wed Jan 24, 2007 8:58 pm
by winchin
They seem like a fu#ken bargen to me and if they were to suit a patrol i would give you at least $400 for them as thats what there prob worth
Posted: Thu Jan 25, 2007 7:12 am
by Goutman
The back spacing.... well from the wheel nut side of the wheel, from the hub to the outer lip measures 135mm... an from the inside to the outer lip measures 80 mm.. hope this is what you were after Dude. Any other questions i'll do my best to answer before the auction ends.
Outer limits an ebay are my 2 new best friends
i was bitten on my left hand by a dog on new yeas eve, unfortunately cant lay bricks an the bank still wants there mortgage repayments
Posted: Thu Jan 25, 2007 12:25 pm
by Reddo
PM sent
Posted: Thu Jan 25, 2007 2:58 pm
by Goutman
sorry mate didnt recieve a pm
Posted: Thu Jan 25, 2007 3:46 pm
by Reddo
dam...sent again!!
Posted: Thu Jan 25, 2007 9:34 pm
by Reddo
dam dam dam....now sold I note, for 250 dollars
.
Posted: Thu Jan 25, 2007 9:35 pm
by Reddo
dam dam dam....now sold I note, for 250 dollars
.
Posted: Thu Jan 25, 2007 11:09 pm
by The Dude
bloody bargin
Posted: Fri Jan 26, 2007 8:26 am
by Maggot4x4
Posted: Sat Jan 27, 2007 6:22 am
by Reddo
Err....no thanks.
Full rebuild ....maybe 5K?
But full points for the salesmanship - this guy could sell oil to the Arabs!!
...a very expensive boat anchor..
Posted: Mon Jan 29, 2007 1:47 pm
by ISUZUROVER
That is a truck engine - so 85Bhp pump instead of the 99Bhp the county had - also needs a modified sump, different oil filter and 12V starter to fit a LR.
Agreed a rebuild is about $5k to pay a mechanic to do, but an exchange reco engine from repco/gem is about the 7.5k mark.