Page 1 of 1

suzuki diff centers

Posted: Thu Jan 25, 2007 9:33 pm
by mad_zook
just a thort but i have a 92wt sierra with the 3.7 diff centers will the 3.9 1.3nt drover centers bolt in also will the 4.1 nt 1lt centers bolt in also thanks

Re: suzuki diff centers

Posted: Thu Jan 25, 2007 10:13 pm
by Podge
mad_zook wrote:just a thort but i have a 92wt sierra with the 3.7 diff centers will the 3.9 1.3nt drover centers bolt in also will the 4.1 nt 1lt centers bolt in also thanks
Yes, N/T 3.9 diff centres will bolt into a W/T. The main difference that there will be is in the flanges which have different bolt sizes (to mount the driveshaft). Be sure to put the centre out the rear in the rear and the front in the front as side gears are different. Just a note that makes no difference is that one of the differences in the front centre between N/T and W/T is that N/T has a 4x pinion hemi (and W/T til 08/88) and the W/T (09/88-96) has a 2x pinion hemi. The 4x pinion will have more strength.

1l (pre Maruti W/T) centres are completely different in size to the 1.3l stuff and there is no hope of fitting.

Posted: Fri Jan 26, 2007 12:57 am
by Zute
Just to add, Maruti 1ltr NT diff's have a differant flange to the Older 1ltr zooks. But can be changed over.