Outer Limits 4x4 Board

Hi all ,

Was wondering if someone could help me with a question..
Torsion bars how high should you go with the weight of a bullbar?
I have mine wound up an extra 2.5", ive got 15x7 rims and 30" a/t's but the front tyres rub when turned 3/4 to full lock on small bumps, ive removed the mud flaps & they still rub on the guards, the torsion bars are OE.

Thankyou.

Emma.

thats a bit wierd....... I have 30" muddies with a 2' lift, and dont rub on anything.

What width tyres are they - Mine are 30 x 9.5.

( could be the rim offset !!)

I didn't think i would have this problem as I am only running 30's on it. I think the bullbar is restricting the tyres as well when on an incline.

can you actually see rub marks on the plastic ??

if possible , fit another set of wheels , different offset , see wat goes !!!!

go to a tyre joint , where you bought them ?? , see wat they say !!!!

Yeah, It pulls the plastic up i keep trying to bolt it in different spots to keep it down, maybe I should cut the plastic up to where it won't rub?
i'll go and see the tyre guys anyway see what happens.
thanks guys
Emma

ferog wrote:Yeah, It pulls the plastic up i keep trying to bolt it in different spots to keep it down, maybe I should cut the plastic up to where it won't rub?
i'll go and see the tyre guys anyway see what happens.
thanks MOOSE
Emma

moose wrote:

ferog wrote:Yeah, It pulls the plastic up i keep trying to bolt it in different spots to keep it down, maybe I should cut the plastic up to where it won't rub?
i'll go and see the tyre guys anyway see what happens.
thanks MOOSE
Emma

you suck moose

robbie wrote:

moose wrote:

ferog wrote:Yeah, It pulls the plastic up i keep trying to bolt it in different spots to keep it down, maybe I should cut the plastic up to where it won't rub?
i'll go and see the tyre guys anyway see what happens.
thanks MOOSE
Emma

you lick really well moose

pierced tounge,s do that !!!!!!

gez go easy

Solution... body lift...