Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cruiser crawler box

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

cruiser crawler box

Post by 75 cruser »

cruiser crawler box

have been looking at running one of these for a while and was looking for any disadvantages and advantages to running one of these any problems with installation etc

rob
come on move over and let the 75 through
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

PM MUD000, he has just had one installed in his 79 series.
Top
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

box

Post by 75 cruser »

have been talking to mud 000 just looking for other experances

rob
come on move over and let the 75 through
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

cost seems to be the biggest drama.
where were you looking at getting it thru?
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

They are too large to fit in there without a 2 inch body lift, and with an 80 series, a cut down main tank.you cant use them with a PTO, you need compressed air to run them and its more than just a straight bolt on, bearings need to be shimmed to correct tolerances etc...having said all that, you have 3 low range ratios to choose from, std 2.5, lower 3.05 and lowest 7.5 reduction. Good for any terrain, and tyre size, and no loss of high range gearing.
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

7.5:1 :cool:

not bad.

but it certainly sounds like alot of work to fit.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 750
Joined: Fri Oct 17, 2003 9:07 pm
Location: Albury

Contact:
Contact MUD000

Post by MUD000 »

would not of hadto have a bodylift to fit mine heaps of room
Could of used the main tank but got hole new one made up as the rear one was pretty exposed now with no springs to protect
Was a fair bit of work to fit $$$$$$
But hopefully well worth it
Mine goes back to Cheezy this weekend to get finished :armsup: :armsup: :armsup: :armsup:
Looking at doing the night pursuit this year as I got asked today to go in it :armsup: :armsup: :armsup:
So this may be its first real work out
Cheers Dan
06 Dual Cab Hilux Loaded with ARB
80 Series With L98 6ltr 35's 4L80E Locked & Loaded
84 Extra Cab Hilux Build up fun car
96 Dual Cab Hilux build up Long range play car
www.trailtrack4x4.com
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest