Page 1 of 1

axle size on a GQ, front/rear & MQ, front/rear

Posted: Fri Feb 02, 2007 5:29 pm
by bucketofbolts
just curious, does a lsd out of a MQ bolt into a GQ front,

just checking axle sizes

Posted: Fri Feb 02, 2007 6:49 pm
by MQSWBUTE
i heard they do but the ARB air locker part numbers dont match up

i chould be wrong

mq rear into gq front

Posted: Fri Feb 02, 2007 6:51 pm
by bucketofbolts
yeah ok, so im after a mq lsd, pathinder or narava

mq

Posted: Fri Feb 02, 2007 7:01 pm
by DR Frankenstine
no they don't fit!! anyone done it can correct me :D

Posted: Fri Feb 02, 2007 7:08 pm
by bucketofbolts
the mq centre wont fit,

Posted: Sat Feb 03, 2007 1:50 pm
by DamTriton
MQ is a "C200" diff (200mm ring)
GQ is an "H233" (233mm ring)
Bigassed rear GQ/GU "H260" (260mm ring)

Navara LSD rear is an H233 with the smaller number of splines that suit the front of a GQ (IIRC 31 splines)

Posted: Sat Feb 03, 2007 3:39 pm
by MQSWBUTE
looks like im wrong hence the diffrent part numbers on the air lockers

Posted: Sat Feb 03, 2007 11:25 pm
by Patroler
DAMKIA wrote:MQ is a "C200" diff (200mm ring)
GQ is an "H233" (233mm ring)
Bigassed rear GQ/GU "H260" (260mm ring)

Navara LSD rear is an H233 with the smaller number of splines that suit the front of a GQ (IIRC 31 splines)
Mq rear can be c200 - unusual, usually h233, and sometimes h260 in late model utes. But the mq rear h233 accepts a different axle to the gq front h233.

as you say tho the navara h233 has been successfully put into a gq front.

gq

Posted: Sun Feb 04, 2007 8:28 pm
by DR Frankenstine
Patroler wrote:
DAMKIA wrote:MQ is a "C200" diff (200mm ring)
GQ is an "H233" (233mm ring)
Bigassed rear GQ/GU "H260" (260mm ring)

Navara LSD rear is an H233 with the smaller number of splines that suit the front of a GQ (IIRC 31 splines)
Mq rear can be c200 - unusual, usually h233, and sometimes h260 in late model utes. But the mq rear h233 accepts a different axle to the gq front h233.

as you say tho the navara h233 has been successfully put into a gq front.
so has an mq so reserch tells me and the axles will fit, 31 spline count (apparently)