Page 1 of 1
Lift for 35" tyres
Posted: Mon Nov 17, 2003 4:26 pm
by chimpboy
Hi all,
From a search I did (there's a thread here on fitting 36es) I get the impression (it's not that definite) that I could fit 35" tyres under a SWB Maverick with all-up lift of 4" and no cutting.
Is that right? It strikes me as optimistic just from looking at the cars, but then I don't actually have my hands on one yet.
I was thinking of just going 4" suspension lift and leaving body lift for a future date when I need it for some other reason, mainly because suspension lift is gonna be less work than suspension + body and I'm lazy.
Also thinking I won't change the gearing immediately; see how it goes first.
Anyone?
Jason
(newly enMavericked)
Posted: Mon Nov 17, 2003 5:24 pm
by Steven
I've got a lwb with a 4" lift with 3" body lift and 37" baja's. i had to cut 2" out of the back of all the arches. I'm not too sure about the 35's but logically i'd say you would deffinately need the body lift and/or cut the guards.
I've also got the petrol carby motor and with 37's it still has all the balls needed to turn em in any direction i point them. no gearing changed.
Steve
Posted: Mon Nov 17, 2003 6:10 pm
by Area54
I think you'll find you'll need the body lift if you want to wheel the thing. Static ride height might be okay with a 4 inch lift, it will sit slightly higher than a wagon due to less body and chassis weight, but will scrub on articulation without major bumpstop lengthening. You will get by in the short term, but if you want to wheel, it will just get plain annoying with the tyres cracking out the flares, scrubbing on the mudflap bracketry and ripping chunks outta your tyres.
Posted: Mon Nov 17, 2003 9:00 pm
by bogged
GO with 4sus and 2 body, or trim the lip of the archs..
Posted: Tue Nov 18, 2003 9:31 am
by MKPatrolGuy
Dad's Patrol on Q78s with 3" springs and trimmed guards
Posted: Tue Nov 18, 2003 10:28 am
by chimpboy
MKPatrolGuy wrote:Dad's Patrol on Q78s with 3" springs and trimmed guards
Forgive my ignorance but what size is a Q78?
Jason
Posted: Tue Nov 18, 2003 11:01 am
by Area54
36x12.5x15 Super swamper TSL
Posted: Tue Nov 18, 2003 11:25 am
by JK
Area54 wrote:36x12.5x15 Super swamper TSL
36x10.5 x R15 OR R16
Swamper Police.
Being 2" narrower makes a big difference.
Posted: Tue Nov 18, 2003 1:27 pm
by RoldIT
35.5"x10.8"
... Swamper Police Internal Affairs.
Posted: Tue Nov 18, 2003 1:32 pm
by JK
RoldIT wrote:35.5"x10.8"
... Swamper Police Internal Affairs.
Jeez we are busy at work hey!
Posted: Tue Nov 18, 2003 1:57 pm
by Area54
RoldIT wrote:35.5"x10.8"
... Swamper Police Internal Affairs.
At what PSI? What size rim? Where did you source this information? Who is your next of kin? Mother's maiden name? Password?
Officer Area54, for the office of TIB. (Tyre Information Bureau)
Posted: Tue Nov 18, 2003 2:33 pm
by RoldIT
