Body and Spring lift
Posted: Mon Feb 05, 2007 5:33 pm
Can anyone help me, I'm looking at lifting my Mid Wheel Base cruiser. At the moment I have a two inch lift but I believe that it is not enough to fit 35's under. The rear springs are 75mm above standard. The front are stuffed due to a launch that shouldnt have happend. 
Q's :1) Are 50mm blocks worth putting under or what size would you guys recommend (50mm to high?)?
2)What type are best polly or aluminium or does it matter?
3)Where can I get decent springs in victoria not arb, tjm havnt had to much luck with those.
4)Will a two inch lift and 50mm body lift allow me to have the clearence that I require.
Cheers
Q's :1) Are 50mm blocks worth putting under or what size would you guys recommend (50mm to high?)?
2)What type are best polly or aluminium or does it matter?
3)Where can I get decent springs in victoria not arb, tjm havnt had to much luck with those.
4)Will a two inch lift and 50mm body lift allow me to have the clearence that I require.
Cheers