Outer Limits 4x4 Board

Ok im about to order some flares for my 4 door and before i get all silly n stuff i would really like some informed opinons and advise on the cutting on the rear doors , i don't think even a dummy like me can sort the fronts out . Are there any "tricks" of the fitting of the rears ?
cheers all

I have only done a 2 door - about to do a four door as well.

This thread has some good info and pics in it...

http://www.pirate4x4.com/forum/showthread.php?s=&threadid=160182&highlight=rear+trimming

lots of patients i ended up getting my local smashy to fit them they look great but it took him 1 1/2 days to do i did the front in 1/2 a day

Easy to fit just take time and care doing rears.
inner guard is easy.
the door is the hard bit.
not hard as such but CARE must be taken as once you cut to much off its gone.

Michael.

Thanks guys great info , i will grab a nibbler and 4 inch grinder this Monday and take time , as long as the instructions aren't like every other instructions that are written by dyslexic Chinese !