Page 1 of 1

Rebuild kit for a 1.3l donk

Posted: Thu Feb 08, 2007 9:31 am
by cohunas
I've pulled the engine out and after hunting around to find a good 1.3l engine second hand i've come up with nothing...so i think i'll have a go at rebuilding this one.
Can you guys advise where i can get a rebuild kit from and a rough idea on what one should cost?
Any other tips for rebuilding it would also be appreciated.

I'm thinking i'll give the block and crank to speedworks and get them machined, but should i get the pistons/kit first so they can bore the engine to suit?

Posted: Thu Feb 08, 2007 9:42 am
by smiley_smoke
what state are you in? there are plenty of engines around.. put a wanted ad in as well taht should help.

Posted: Thu Feb 08, 2007 9:45 am
by cohunas
oops, just updated my profile smiley, I'm in Melbourne.
Ive looked around at a few just most have been rooted, i'll give the wanted section a go though - thanks.