Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Search found 22 matches

by bigdee
Wed May 05, 2010 9:10 pm
Forum: Cruiser / Prado
Topic: Death wobbles on 80series
Replies: 34
Views: 2220

use genuine panard bushes
by bigdee
Wed May 05, 2010 9:06 pm
Forum: Cruiser / Prado
Topic: 100 series ifs lift and power upgrade
Replies: 0
Views: 170

100 series ifs lift and power upgrade

wots the best lift for ifs 100 series using diff drop kit keeping best ride and getting good flex out of rear, also putting the thirsty v8 on injected gas and wondering if anyone chipped them up wot sort of power increase they got and whether it affected the tune of the gas thanks
by bigdee
Tue Feb 02, 2010 6:27 pm
Forum: Cruiser / Prado
Topic: 1hz 80 series overheating
Replies: 21
Views: 1308

may have 2 try new clutch hub toyota one is $540 so will be puting after market one in ,always had same driven lights so not that and fuel has been tuned on dyno also have original shroud in place, have to try cleaning the a/c cooler make sure thats not blocked never used to get hot with the turbo ...
by bigdee
Mon Feb 01, 2010 6:22 pm
Forum: Cruiser / Prado
Topic: 1hz 80 series overheating
Replies: 21
Views: 1308

will overheat when pushed long enough i just got a portable temp gauge and will double chek the temp dont think it a head because i dont have any signs but will have the water checked this week for gases
by bigdee
Mon Feb 01, 2010 6:08 pm
Forum: Cruiser / Prado
Topic: 1hz 80 series overheating
Replies: 21
Views: 1308

1hz 80 series overheating

have a 80 series 1hz with safari turbo and top mount intercooler started getting hot when put under load as in up long hills or towing running 12psi with pyro never reaches 550 , have new geniune radiator, water pump, thermostat and clutch hub has new oil in it and works good, have been told by a ...
by bigdee
Mon Jun 09, 2008 8:27 pm
Forum: Cruiser / Prado
Topic: 100 series ifs lift
Replies: 0
Views: 135

100 series ifs lift

wots the best way to lift 100 series ifs looking 4 about 3 inch lift , snake racing sells a cross member to drop diff centre 2 realign cvs and better torsion bars but how much lift will i get out of it or is there better kits out there
by bigdee
Mon May 26, 2008 7:28 pm
Forum: Cruiser / Prado
Topic: 80 series gearbox
Replies: 7
Views: 553

put new thrust bearing in when i put the clutch in and syncro gone in second gear might pull it out if it gets worse and have someone rebuild it as it has 430,000 klms onit it cant last forever thanks 4 ya help
by bigdee
Sat May 24, 2008 8:58 pm
Forum: Cruiser / Prado
Topic: 80 series gearbox
Replies: 7
Views: 553

gearbox

ijust put in new safari tuff clutch my box has started rattling in nuetral and goes away when clutch pushed in which i think is input bearing how much does it generally cost to have new bearings and syncros put in
by bigdee
Sat May 24, 2008 8:46 pm
Forum: Mitsubishi
Topic: 92 pajero wont start
Replies: 4
Views: 317

pajero

thanks 4 the information, where would the crank angle sensor be on these
by bigdee
Fri May 23, 2008 9:55 pm
Forum: Mitsubishi
Topic: 92 pajero wont start
Replies: 4
Views: 317

92 pajero wont start

a friend has a 92 pajero 3litre v6 that winds over but has no spark the distributer, ignition module and coil have been changed but no luck been running fine just jumped in after work and wouldnt start.any help would be appreciated
by bigdee
Fri May 23, 2008 9:20 pm
Forum: Cruiser / Prado
Topic: 80 series gearbox
Replies: 7
Views: 553

80 series gearbox

i have a 93 80 series 1hz and gearbox is about stuffed and i have a gearbox out of 95 4.5litre petrol 80 series which had a full time transfer , will it bolt in and r the ratios all the same and will my part time transfer fit onto it , any info would be good.
by bigdee
Mon Oct 22, 2007 9:48 pm
Forum: Cruiser / Prado
Topic: 1hdt-fe into 1hz spot
Replies: 15
Views: 799

r they a good engine and will my safari turbo kit bolt on as that is what its missing the manifold and turbo
by bigdee
Mon Oct 22, 2007 9:33 pm
Forum: Cruiser / Prado
Topic: 1hdt-fe into 1hz spot
Replies: 15
Views: 799

1hdt-fe into 1hz spot

just wondering if it was a big job to put a 1hdt-fe engine into spot of where the 1hz came out of in my 93 80 series specially the wiring side of things, any information would be appreciated
by bigdee
Wed May 02, 2007 7:05 pm
Forum: Cruiser / Prado
Topic: ihz big end bearings
Replies: 15
Views: 958

if the crank has cracks at oil feed holes what do u do put it back together and wait till i lose oil pressure as it could go for awhile like that if the plastiguage measures over size do i put a new bearing in and see if it measures up alright if the old ones measure up and look alright do i leave ...
by bigdee
Sun Apr 29, 2007 10:05 pm
Forum: Cruiser / Prado
Topic: ihz big end bearings
Replies: 15
Views: 958

thanks for the input whats a good brand of bearing if they show signs of wear and should i go to the trouble of using plastigauge when fitting the new ones to check clearances or just bang em in thanks
by bigdee
Sat Apr 28, 2007 9:56 pm
Forum: Cruiser / Prado
Topic: ihz big end bearings
Replies: 15
Views: 958

ihz big end bearings

just wondering if i should replace big end bearings on my 1hz 80 series 94 model .its up to 400,000klms and i'm fitting a safari turbo kit and the sump has to come off to fit return oil line anyway, motor is running fine and has reasonably good oil pressure and wonder whether to upset it would cause ...
by bigdee
Fri Dec 29, 2006 1:24 pm
Forum: Cruiser / Prado
Topic: really bad steering shake 80 series
Replies: 23
Views: 1204

I also no this problem very well and spent 6 months trying to fix it at the time i was running 35 claws with external bead locks, i have a five inch lift, the first thing that fixed it was toyota panard bushes then it come back then a rtc dampener which made it worse, i then put the radius arms on ...
by bigdee
Mon Aug 28, 2006 8:16 pm
Forum: Nissan
Topic: gq cvs
Replies: 11
Views: 502

just buy an 80 series
by bigdee
Wed Jul 12, 2006 8:52 pm
Forum: Cruiser / Prado
Topic: best turbo 4 80 series
Replies: 7
Views: 484

only half manifold thanks anyway
by bigdee
Sun Jul 09, 2006 8:11 pm
Forum: Cruiser / Prado
Topic: best turbo 4 80 series
Replies: 7
Views: 484

best turbo 4 80 series

just wondering what the best size turbo 4 good reliable power, I've got a 1hz 80 series with a mere 400,000kays on the clock,Ive just gotta find a 1hz standard manifold and turbo and i can do the rest myself, been told a t3 garrett will do[/img]
by bigdee
Sat Jul 08, 2006 9:46 pm
Forum: Cruiser / Prado
Topic: 80 series rear rotors
Replies: 2
Views: 252

it does see a bit of mud, maybe next i'll look at putting kits through the calipers, although there are no blue or hot spots in rotors. The rotors seem to start cracking through the handbrake area i wonder if there is a better quality rotor i can use
by bigdee
Thu Jul 06, 2006 9:14 pm
Forum: Cruiser / Prado
Topic: 80 series rear rotors
Replies: 2
Views: 252

80 series rear rotors

just wondering if anyone has had trouble with rear discs on 80 series cracking and is there any logical reason that i would only be getting 20,000ks out of pads