Outer Limits 4x4 Board

Hello All, I don't know if anyone can help me, but here goes. I have been rebuilding my MQ shorty for about 18 months and have done everything towards running V8 on straight gas. After fitting the LPG tank, converter, lock off, 425 gas carby, recurved the distributor for gas only, removed the petrol ...

You could possibly do what I'm doing. I have my fridge, big stereo etc. running off two 100 Ah auxiliary batteries plus my winch through a 200 amp solenoid. At the winch I have added a second solenoid controlled by a momentary switch with a 2 b&s cable from there back to the main cranking battery ...

Hello Gilboss, You may want to start reading some of the links to the bible below. SOA / SUA & Suspension: http://www.suspensionstuff.com.au/ ENGINEERS: should you decide to do an SOA http://www.outerlimits4x4.com/viewtopic.php?t=33622 General Querrys: http://www.outerlimits4x4.com/viewtopic.php?t ...

You could always try one of these that are on ebay. http://cgi.ebay.com.au/LCD-Display-Digi ... dZViewItem

It all looks pretty straight forword.

I havn't started on the chassis yet so I don't have any decent pics but this one will give you the general idea (not my picture)

lexi wrote:I was interested to see a pic of bare chassis to get a look at them.

Alex

macca81, It sure is hard to go around the block for test drives, I had a lot of mates before I started asking them to come for a test drive and they found out they were the wheels.

Terry

Hi Alex, Well if I could pan out about 6 meters you would see it sitting outside the garage, I'm doing a complete strip and rebuild and getting the hard bit out of the way first. Those pics were taken in the sixth month 07 and that part of the body is now finished. About three months and I will have ...

Hello Alex, This is what I used http://www.mcicomputers.com/other_images/Rolloverbars01.jpg http://www.mcicomputers.com/other_images/Rolloverbars02.jpg http://www.mcicomputers.com/other_images/Rolloverbars03.jpg I am only running a short wheel base and the two bars hold it easily (the prop on the ...

Mulisha wrote:

trucks wrote:Heres the one I bought.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0079284472

Didn't you want to lower that car ?

Definatly not, already done a 2" body lift to make a few items more accessible.

Heres the one I bought.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0079284472

Hello Rees, You are researching the same thing I am at the moment. I was under a mates GQ LWB the other day with my MQ SWB beside it and was measuring up both. He has a 450 x 900 tank (approx. 100 L usable) behind his back wheels. Mine has a 2" body lift, about a 2" suspension lift and currently on ...

Hello all, Just new to the forum and everywhere I read that people don't like the divorced transfer cases. Can you tell me why as it seems like a great idea that you could mate almost any gearbox output shaft to it with a short jack shaft? Are they too light duty? Or are the ratios all wrong or what ...